{"title":"Spare parts","description":"","products":[{"product_id":"motherboard-tenlog","title":"TENLOG 32-Bit Silent Motherboard - Marlin 2.0 Upgrade with TMC2209 Drivers \u0026 WiFi Control","description":"\u003col\u003e\n\u003cli\u003e\n\u003cspan data-mce-fragment=\"1\"\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/-VqB4iDsAKs\" height=\"315\" width=\"560\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture\" frameborder=\"0\"\u003e\u003c\/iframe\u003eThe main chip is upgraded from 8 bit to 32 bit, and the printer runs more smoothly!\u003cbr data-mce-fragment=\"1\"\u003e2. The 32 bit mainboard supports wifi, and the printer can be controlled through the network!\u003cbr data-mce-fragment=\"1\"\u003e3. The memory card adopts TF card, which is small and convenient!\u003cbr data-mce-fragment=\"1\"\u003e4. The mainboard adopts the mainstream typ-c interface, which can be connected in both directions!\u003cbr data-mce-fragment=\"1\"\u003e5. The mainboard supports Marlin2.0 firmware!\u003cbr data-mce-fragment=\"1\"\u003e6. The DIWEN display does not support the replacement of 32 bit mainboards, because the screen firmware cannot be refreshed, and it needs to be replaced with a TJC screen.\u003cbr data-mce-fragment=\"1\"\u003e7. If your 3D printer is an integrated motherboard, you cannot replace the 32 bit mainboard because the screw holes do not match.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e8. \u003cspan\u003eAll motherboards and screens shipped have pre-installed firmware and do not need to be reinstalled.\u003c\/span\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/Lfn3pd5ezL8\" title=\"YouTube video player\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"TENLOG","offers":[{"title":"TL-32MB+drive","offer_id":47703863722177,"sku":"TL-32MB-drive","price":119.99,"currency_code":"USD","in_stock":true},{"title":"TL-32MB-no drive","offer_id":47703863754945,"sku":"TL-MB-32bit","price":94.99,"currency_code":"USD","in_stock":true},{"title":"TL-32MB+drive+TJC screen","offer_id":47703863787713,"sku":"MB-32BIT-DRIVE-TJC","price":149.99,"currency_code":"USD","in_stock":true},{"title":"TL-32MB-no drive+TJC screen","offer_id":47703863820481,"sku":"MB-32BIT-NODRIVE-TJC","price":134.99,"currency_code":"USD","in_stock":true},{"title":"TL-32MB-Mainboard 1","offer_id":47703863853249,"sku":"MB-32BIT-MAIN1","price":69.99,"currency_code":"USD","in_stock":true},{"title":"TL-32MB-Mainboard 2","offer_id":47703863886017,"sku":"MB-32BIT-MAIN2","price":39.99,"currency_code":"USD","in_stock":true},{"title":"TL-WIFI module","offer_id":47809264287937,"sku":"MB-TL-WIFI-MODULE","price":24.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0777\/6059\/4113\/files\/tenlog-3d-printer-marlin-20-silent-board-motherboard-387417.jpg?v=1748330950"},{"product_id":"klipper-upgrade-kit","title":"TENLOG 3D printer IDEX New 32 bit  Klipper motherboard upgrade Kit","description":"\u003cp\u003e\u003cstrong data-mce-fragment=\"1\"\u003eTENLOG 3D Printer 32 bit Motherboard Video\u003ciframe title=\"IDEX New 32 Bit Klipper Motherboard Upgrade Kit\" src=\"https:\/\/www.youtube.com\/embed\/TNm_X41DXhc\" height=\"802\" width=\"1280\" allowfullscreen=\"\" referrerpolicy=\"strict-origin-when-cross-origin\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eTENLOG\/INNOCUBE 3D Printer Klipper upgrade Kit Description\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp data-mce-fragment=\"1\"\u003e【No Edge Curling】 \u003cspan data-mce-fragment=\"1\"\u003eKlipper is an alternative firmware for 3D printers that offloads the processing from the printer's mainboard to a more powerful computer, like a Raspberry Pi. This allows for faster and more precise movements and additional features like pressure advance and advanced kinematics.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e【Excellent Flatness】\u003cstrong\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eIDEX Klipper upgrade kit\u003c\/span\u003e\u003cspan style=\"color: rgb(255, 42, 0);\" data-mce-fragment=\"1\"\u003e  includes  7-inch Display， Pi, 32G TF card， motherboard 1、motherboard 2、toolboard，1PCS TMC5160\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan\u003eAdopts 32-bit 168MHz ARM Cortex-M0+ series STM32F407VET6 \u003c\/span\u003e\u003cspan\u003e\u003cspan style=\"font-family: Calibri;\"\u003eMCU\u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan\u003eOnboard TMC-driven SPI and UART working modes\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan\u003eOnboard DIAG function pin, which can be used for unlimited position return by simply plugging and unplugging the jumper cap\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan\u003efan 24V, eliminating the trouble of purchasing a step-down module\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan\u003eReserved SPI interface allows customers to connect external acceleration sensors for acceleration compensation\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan\u003eThe system is pre-installed with Klipper, moonraker, mainsail, fulidd, klipper-screen, Crowsmest, no need to change the source and other complicated operations, it is easier for novices to get started\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan\u003eDrive working mode support: SPI, UART, STEP\/DIR\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan\u003eSupported drivers: support external TMC5160Pro, TMC5160, TMC2209, TMC2225, TMC2226, TMC2208, TMC2130, A4988, etc.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan\u003eExpansion interface: BLTouch (Servos, Probe)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch2 data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/h2\u003e","brand":"INNOCUBE 3D Printer","offers":[{"title":"IDEX Klipper upgrade kit","offer_id":47703864803521,"sku":"Klipper upgrade kit","price":249.99,"currency_code":"USD","in_stock":true},{"title":"7 inch HDMI Touch Screen Display+pi","offer_id":47703864836289,"sku":"7in Display","price":109.99,"currency_code":"USD","in_stock":true},{"title":"Klipper 32 bit  motherboard 1","offer_id":48301094011073,"sku":"","price":59.99,"currency_code":"USD","in_stock":true},{"title":"Klipper 32 bit motherboard 2","offer_id":48301094043841,"sku":"","price":49.99,"currency_code":"USD","in_stock":true},{"title":"Toolboard","offer_id":48339923304641,"sku":"","price":49.99,"currency_code":"USD","in_stock":true},{"title":"Pi3","offer_id":48372802912449,"sku":"","price":59.99,"currency_code":"USD","in_stock":true},{"title":"Klipper 32 bit  motherboard 1 and motherboard 2","offer_id":48394916167873,"sku":"","price":84.99,"currency_code":"USD","in_stock":true},{"title":"Klipper 32 bit  motherboard 1 ，motherboard 2 and toolboard","offer_id":48394916200641,"sku":"","price":119.99,"currency_code":"USD","in_stock":true},{"title":"TMC5160","offer_id":48394945429697,"sku":"","price":19.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0777\/6059\/4113\/files\/tenlog-3d-printer-idex-new-32-bit-klipper-motherboard-upgrade-kit-545249.jpg?v=1748330945"},{"product_id":"belt","title":"TENLOG IDEX 3D Printer good quality belt","description":"\u003cp\u003e\u003cstrong style=\"font-size: 1.4em;\"\u003eTENLOG IDEX 3D Printer belt Video\u003c\/strong\u003e \u003cbr\u003e\u003ciframe style=\"font-size: 1.4em;\" src=\"https:\/\/www.youtube.com\/embed\/i1FuAa4p5vE\" width=\"560\" height=\"315\" frameborder=\"0\" allowfullscreen=\"allowfullscreen\"\u003e\u003c\/iframe\u003e\u003cbr\u003e\u003cstrong style=\"font-size: 1.4em;\"\u003eTENLOG IDEX 3D Printer belt Specifications\u003c\/strong\u003e \u003c\/p\u003e\n\u003ctable style=\"font-size: 1.4em; float: left;\" width=\"530\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 266.91px;\"\u003e\u003cstrong\u003eName:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 269.132px;\"\u003eTENLOG IDEX 3D Printer belt\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 266.91px;\"\u003e\u003cstrong\u003eManufacturer:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 269.132px;\"\u003eTENLOG 3D Printer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 266.91px;\"\u003e\u003cstrong\u003eModel Number:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 269.132px;\"\u003eHands H2\/TL-D3 Pro\/TL-D5\/TL-D6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 266.91px;\"\u003e\u003cstrong\u003eColor:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 269.132px;\"\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 266.91px;\"\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 269.132px;\"\u003eAluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 266.91px;\"\u003e\u003cstrong\u003eSize:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 269.132px;\"\u003e58 × 50 × 25cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 266.91px;\"\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 269.132px;\"\u003e17kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 266.91px;\"\u003e\u003cstrong\u003ePower Source:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 269.132px;\"\u003eAC 100-240V 50-60Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 266.91px;\"\u003e\u003cstrong\u003eMax Nozzle Temperature:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 269.132px;\"\u003e300℃\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 266.91px;\"\u003e\u003cstrong\u003eMax Hot bed Temperature:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 269.132px;\"\u003e110℃\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 266.91px;\"\u003e\u003cstrong\u003eFilament:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 269.132px;\"\u003e1.75mm TPU, PVA, PLA, ABS, HIPS, WOOD, PETG, FLEXIBLE，Nylon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan style=\"font-size: 1.4em;\"\u003e\u003cstrong\u003eTENLOG IDEX 3D Printer belt Description\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eHands 2    Y\u003c\/span\u003e68cm        X95\u003cspan data-mce-fragment=\"1\"\u003ecm\u003c\/span\u003e\u003cbr\u003e\u003cspan data-mce-fragment=\"1\"\u003eTL-D3       Y\u003c\/span\u003e83\u003cspan data-mce-fragment=\"1\"\u003e5\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003ecm\u003c\/span\u003e      \u003cspan data-mce-fragment=\"1\"\u003eX\u003c\/span\u003e110\u003cspan data-mce-fragment=\"1\"\u003ecm\u003c\/span\u003e\u003cbr\u003e\u003cspan data-mce-fragment=\"1\"\u003eTL-D5       Y\u003c\/span\u003e140\u003cspan data-mce-fragment=\"1\"\u003ecm\u003c\/span\u003e      X150\u003cspan data-mce-fragment=\"1\"\u003ecm\u003c\/span\u003e\u003cbr\u003e\u003cspan data-mce-fragment=\"1\"\u003eTL-D6       Y\u003c\/span\u003e187\u003cspan data-mce-fragment=\"1\"\u003e5\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003ecm\u003c\/span\u003e    X171\u003cspan data-mce-fragment=\"1\"\u003ecm\u003c\/span\u003e\u003c\/p\u003e","brand":"TENLOG","offers":[{"title":"Hands 2 \/ Y","offer_id":47703866048705,"sku":"","price":12.99,"currency_code":"USD","in_stock":true},{"title":"Hands 2 \/ X 2pcs","offer_id":47703866081473,"sku":"","price":19.99,"currency_code":"USD","in_stock":true},{"title":"TL-D3 Pro \/ Y","offer_id":47703866114241,"sku":"","price":12.99,"currency_code":"USD","in_stock":true},{"title":"TL-D3 Pro \/ X 2pcs","offer_id":47703866147009,"sku":"","price":19.99,"currency_code":"USD","in_stock":true},{"title":"TL-D5 \/ Y","offer_id":47703866179777,"sku":"","price":21.99,"currency_code":"USD","in_stock":true},{"title":"TL-D5 \/ X 2pcs","offer_id":47703866212545,"sku":"","price":27.99,"currency_code":"USD","in_stock":true},{"title":"TL-D6 \/ Y","offer_id":47703866245313,"sku":"","price":19.99,"currency_code":"USD","in_stock":true},{"title":"TL-D6 \/ X 2pcs","offer_id":47703866278081,"sku":"","price":29.99,"currency_code":"USD","in_stock":true},{"title":"TL-D3 V2 \/ Y","offer_id":47703866310849,"sku":"","price":12.99,"currency_code":"USD","in_stock":true},{"title":"TL-D3 V2 \/ X 2pcs","offer_id":47703866343617,"sku":"","price":19.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0777\/6059\/4113\/products\/tenlog-idex-3d-printer-belt-929597.jpg?v=1763883962"},{"product_id":"cable-vga","title":"TENLOG 3D Printer With Cable BMG Extruder Motherboard","description":"\u003cp\u003e\u003cstrong style=\"font-size: 1.4em;\"\u003eTENLOG 3D Printer With Cable BMG Extruder Motherboard Video\u003c\/strong\u003e \u003cbr\u003e\u003ciframe style=\"font-size: 1.4em;\" src=\"https:\/\/www.youtube.com\/embed\/QyV14TgWO6A\" height=\"315\" width=\"560\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003cbr\u003e\u003cstrong style=\"font-size: 1.4em;\"\u003eTENLOG 3D Printer With Line BMG Extruder Motherboard Specifications\u003c\/strong\u003e \u003cbr\u003e\u003c\/p\u003e\n\u003ctable style=\"font-size: 1.4em; float: left;\" height=\"418\" width=\"530\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 266.91px;\" data-mce-style=\"width: 266.91px;\"\u003e\u003cstrong\u003eName:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 269.132px;\" data-mce-style=\"width: 269.132px;\"\u003eTENLOG 3D Printer With Line BMG Extruder Motherboard\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 266.91px;\" data-mce-style=\"width: 266.91px;\"\u003e\u003cstrong\u003eManufacturer:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 269.132px;\" data-mce-style=\"width: 269.132px;\"\u003eTENLOG 3D Printer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 266.91px;\" data-mce-style=\"width: 266.91px;\"\u003e\u003cstrong\u003eModel Number:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 269.132px;\" data-mce-style=\"width: 269.132px;\"\u003eHands H2\/TL-D3 Pro\/TL-D5\/TL-D6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 266.91px;\" data-mce-style=\"width: 266.91px;\"\u003e\u003cstrong\u003eColor:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 269.132px;\" data-mce-style=\"width: 269.132px;\"\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 266.91px;\" data-mce-style=\"width: 266.91px;\"\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 269.132px;\" data-mce-style=\"width: 269.132px;\"\u003eAluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 266.91px;\" data-mce-style=\"width: 266.91px;\"\u003e\u003cstrong\u003eSize:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 269.132px;\" data-mce-style=\"width: 269.132px;\"\u003e58 × 50 × 25cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 266.91px;\" data-mce-style=\"width: 266.91px;\"\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 269.132px;\" data-mce-style=\"width: 269.132px;\"\u003e17kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 266.91px;\" data-mce-style=\"width: 266.91px;\"\u003e\u003cstrong\u003ePower Source:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 269.132px;\" data-mce-style=\"width: 269.132px;\"\u003eAC 100-240V 50-60Hz\u003cbr\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 266.91px;\" data-mce-style=\"width: 266.91px;\"\u003e\u003cstrong\u003eMax Nozzle Temperature:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 269.132px;\" data-mce-style=\"width: 269.132px;\"\u003e300℃\u003cbr\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 266.91px;\" data-mce-style=\"width: 266.91px;\"\u003e\u003cstrong\u003eMax Hot bed Temperature:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 269.132px;\" data-mce-style=\"width: 269.132px;\"\u003e110℃\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 266.91px;\" data-mce-style=\"width: 266.91px;\"\u003e\u003cstrong\u003eFilament:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 269.132px;\" data-mce-style=\"width: 269.132px;\"\u003e1.75mm TPU, PVA, PLA, ABS, HIPS, WOOD, PETG, FLEXIBLE，Nylon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 1.4em;\"\u003e\u003cstrong\u003eTENLOG 3D Printer With Line BMG Extruder Motherboard Description\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e【No Edge Curling】Tenlog upgrade 3D printer glass bed, molds could stick on bed firmly without glue, avoiding the issue of print edges curling.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e【Excellent Flatness】upgrade 3D printer glass plate provides more flat and more smooth build surface than magnetic mat or pei sticker, ensuring high flatness for the bottom of model.\u003cbr\u003e【Super Convenient】Very easy to take off the model, no tools needed; This borosilicate glass bed could be fixed with middle sized clips and cleaned with alcohol or acetone at room temperature.\u003cbr\u003e【Compatibility 】Tenlog upgrade 3D printer glass bed is applicable with Creality CR-10 TENLOG TL-D3 Pro\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eHow to install on TENLOG IDEX 3D Printer head\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0548\/6723\/0894\/files\/20210910105646_480x480.jpg?v=1631242671\" width=\"100%\" height=\"349\"\u003e\u003c\/p\u003e","brand":"TENLOG","offers":[{"title":"TL-D3 Pro\/ V2 \/ 1","offer_id":47703868342465,"sku":"VGA","price":25.99,"currency_code":"USD","in_stock":true},{"title":"TL-D3 Pro\/ V2 \/ 2","offer_id":47703868375233,"sku":"","price":45.99,"currency_code":"USD","in_stock":true},{"title":"TL-D5 \/ 1","offer_id":47703868408001,"sku":"","price":29.99,"currency_code":"USD","in_stock":true},{"title":"TL-D5 \/ 2","offer_id":47703868440769,"sku":"","price":54.99,"currency_code":"USD","in_stock":true},{"title":"TL-D6 \/ 1","offer_id":47703868473537,"sku":"","price":29.99,"currency_code":"USD","in_stock":true},{"title":"TL-D6 \/ 2","offer_id":47703868506305,"sku":"","price":54.99,"currency_code":"USD","in_stock":true},{"title":"D4-1.8M \/ 1","offer_id":48721992319169,"sku":null,"price":27.99,"currency_code":"USD","in_stock":true},{"title":"D4-1.8M \/ 2","offer_id":48721992351937,"sku":null,"price":45.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0777\/6059\/4113\/products\/tenlog-3d-printer-with-cable-bmg-extruder-motherboard-313300.jpg?v=1763883962"},{"product_id":"bmg-direct-extrusion-module","title":"TENLOG 3D Printer Direct Extrusion Module","description":"\u003cstrong style=\"font-size: 1.4em;\"\u003eTENLOG 3D Printer Direct Extruding Kit Video\u003c\/strong\u003e \u003cbr\u003e \u003ciframe style=\"font-size: 1.4em;\" src=\"https:\/\/www.youtube.com\/embed\/QyV14TgWO6A\" height=\"315\" width=\"560\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003cbr\u003e\u003cstrong style=\"font-size: 1.4em;\"\u003eTENLOG 3D Printer Direct Extruding Kit Specifications\u003c\/strong\u003e \u003cbr\u003e\n\u003ctable style=\"font-size: 1.4em; float: left;\" height=\"418\" width=\"530\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 266.91px;\" data-mce-style=\"width: 266.91px;\"\u003e\u003cstrong\u003eName:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 269.132px;\" data-mce-style=\"width: 269.132px;\"\u003e3D Printers cleaning nozzles Metal brush\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 266.91px;\" data-mce-style=\"width: 266.91px;\"\u003e\u003cstrong\u003eManufacturer:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 269.132px;\" data-mce-style=\"width: 269.132px;\"\u003eTENLOG 3D Printer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 266.91px;\" data-mce-style=\"width: 266.91px;\"\u003e\u003cstrong\u003eModel Number:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 269.132px;\" data-mce-style=\"width: 269.132px;\"\u003eHands H2\/TL-D3 Pro\/TL-D5\/TL-D6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 266.91px;\" data-mce-style=\"width: 266.91px;\"\u003e\u003cstrong\u003eColor:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 269.132px;\" data-mce-style=\"width: 269.132px;\"\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 266.91px;\" data-mce-style=\"width: 266.91px;\"\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 269.132px;\" data-mce-style=\"width: 269.132px;\"\u003eAluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 266.91px;\" data-mce-style=\"width: 266.91px;\"\u003e\u003cstrong\u003eSize:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 269.132px;\" data-mce-style=\"width: 269.132px;\"\u003e58 × 50 × 25cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 266.91px;\" data-mce-style=\"width: 266.91px;\"\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 269.132px;\" data-mce-style=\"width: 269.132px;\"\u003e17kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 266.91px;\" data-mce-style=\"width: 266.91px;\"\u003e\u003cstrong\u003ePower Source:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 269.132px;\" data-mce-style=\"width: 269.132px;\"\u003eAC 100-240V 50-60Hz\u003cbr\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 266.91px;\" data-mce-style=\"width: 266.91px;\"\u003e\u003cstrong\u003eMax Nozzle Temperature:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 269.132px;\" data-mce-style=\"width: 269.132px;\"\u003e300℃\u003cbr\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 266.91px;\" data-mce-style=\"width: 266.91px;\"\u003e\u003cstrong\u003eMax Hot bed Temperature:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 269.132px;\" data-mce-style=\"width: 269.132px;\"\u003e110℃\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 266.91px;\" data-mce-style=\"width: 266.91px;\"\u003e\u003cstrong\u003eFilament:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 269.132px;\" data-mce-style=\"width: 269.132px;\"\u003e1.75mm TPU, PVA, PLA, ABS, HIPS, WOOD, PETG, FLEXIBLE，Nylon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan style=\"font-size: 1.4em;\"\u003e\u003cstrong\u003eTENLOG 3D Printer Extruder Hot End Metal Hot End Kit Description\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e【No Edge Curling】Tenlog upgrade 3D printer glass bed, molds could stick on bed firmly without glue, avoiding the issue of print edges curling.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e【Excellent Flatness】upgrade 3D printer glass plate provides more flat and more smooth build surface than magnetic mat or pei sticker, ensuring high flatness for the bottom of model.\u003cbr\u003e【Super Convenient】Very easy to take off the model, no tools needed; This borosilicate glass bed could be fixed with middle sized clips and cleaned with alcohol or acetone at room temperature.\u003cbr\u003e【Compatibility 】Tenlog upgrade 3D printer glass bed is applicable with Creality CR-10 TENLOG TL-D3 Pro\u003c\/p\u003e\n\u003cdiv id=\"gtx-trans\" style=\"position: absolute; left: 383px; top: 327.8px;\"\u003e\n\u003cdiv class=\"gtx-trans-icon\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e","brand":"TENLOG","offers":[{"title":"New \/ All E1 and E2","offer_id":47703870439617,"sku":"DIRECT-MOD-ALL-E1E2","price":49.99,"currency_code":"USD","in_stock":true},{"title":"New \/ E1","offer_id":47703870472385,"sku":"DIRECT-MOD-LEFT-E1","price":26.99,"currency_code":"USD","in_stock":true},{"title":"New \/ E2","offer_id":47703870505153,"sku":"DIRECT-MOD-RIGHT-E2","price":26.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0777\/6059\/4113\/products\/tenlog-3d-printer-direct-extrusion-module-583179.jpg?v=1763883962"},{"product_id":"photoelectric-switch","title":"TENLOG 3D Printer Photoelectric Switch *2","description":"\u003cstrong style=\"font-size: 1.4em;\"\u003eTENLOG 3D Printer Photoelectric switch Video\u003c\/strong\u003e \u003cbr\u003e \u003ciframe style=\"font-size: 1.4em;\" src=\"https:\/\/www.youtube.com\/embed\/i1FuAa4p5vE\" height=\"315\" width=\"560\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003cbr\u003e\u003cstrong style=\"font-size: 1.4em;\"\u003eTENLOG 3D Printer Photoelectric switch Specifications\u003c\/strong\u003e \u003cbr\u003e\n\u003ctable style=\"font-size: 1.4em; float: left;\" height=\"418\" width=\"530\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 266.91px;\" data-mce-style=\"width: 266.91px;\"\u003e\u003cstrong\u003eName:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 269.132px;\" data-mce-style=\"width: 269.132px;\"\u003e3D Printer Photoelectric switch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 266.91px;\" data-mce-style=\"width: 266.91px;\"\u003e\u003cstrong\u003eManufacturer:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 269.132px;\" data-mce-style=\"width: 269.132px;\"\u003eTENLOG 3D Printer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 266.91px;\" data-mce-style=\"width: 266.91px;\"\u003e\u003cstrong\u003eModel Number:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 269.132px;\" data-mce-style=\"width: 269.132px;\"\u003eHands H2\/TL-D3 Pro\/TL-D5\/TL-D6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 266.91px;\" data-mce-style=\"width: 266.91px;\"\u003e\u003cstrong\u003eColor:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 269.132px;\" data-mce-style=\"width: 269.132px;\"\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 266.91px;\" data-mce-style=\"width: 266.91px;\"\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 269.132px;\" data-mce-style=\"width: 269.132px;\"\u003eAluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 266.91px;\" data-mce-style=\"width: 266.91px;\"\u003e\u003cstrong\u003eSize:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 269.132px;\" data-mce-style=\"width: 269.132px;\"\u003e58 × 50 × 25cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 266.91px;\" data-mce-style=\"width: 266.91px;\"\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 269.132px;\" data-mce-style=\"width: 269.132px;\"\u003e17kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 266.91px;\" data-mce-style=\"width: 266.91px;\"\u003e\u003cstrong\u003ePower Source:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 269.132px;\" data-mce-style=\"width: 269.132px;\"\u003eAC 100-240V 50-60Hz\u003cbr\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 266.91px;\" data-mce-style=\"width: 266.91px;\"\u003e\u003cstrong\u003eMax Nozzle Temperature:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 269.132px;\" data-mce-style=\"width: 269.132px;\"\u003e300℃\u003cbr\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 266.91px;\" data-mce-style=\"width: 266.91px;\"\u003e\u003cstrong\u003eMax Hot bed Temperature:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 269.132px;\" data-mce-style=\"width: 269.132px;\"\u003e110℃\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 266.91px;\" data-mce-style=\"width: 266.91px;\"\u003e\u003cstrong\u003eFilament:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 269.132px;\" data-mce-style=\"width: 269.132px;\"\u003e1.75mm TPU, PVA, PLA, ABS, HIPS, WOOD, PETG, FLEXIBLE，Nylon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan style=\"font-size: 1.4em;\"\u003e\u003cstrong\u003eTENLOG 3D Printer Photoelectric switch Description\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e【No Edge Curling】Tenlog upgrade 3D printer glass bed, molds could stick on bed firmly without glue, avoiding the issue of print edges curling.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e【Excellent Flatness】upgrade 3D printer glass plate provides more flat and more smooth build surface than magnetic mat or pei sticker, ensuring high flatness for the bottom of model.\u003cbr\u003e【Super Convenient】Very easy to take off the model, no tools needed; This borosilicate glass bed could be fixed with middle sized clips and cleaned with alcohol or acetone at room temperature.\u003cbr\u003e【Compatibility 】Tenlog upgrade 3D printer glass bed is applicable with Creality CR-10 TENLOG TL-D3 Pro\u003c\/p\u003e\n\u003cdiv id=\"gtx-trans\" style=\"position: absolute; left: 57px; top: 907px;\"\u003e\n\u003cdiv class=\"gtx-trans-icon\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e","brand":"TENLOG","offers":[{"title":"Default Title","offer_id":47703871324353,"sku":"","price":14.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0777\/6059\/4113\/products\/tenlog-3d-printer-photoelectric-switch-2-160369.jpg?v=1763883962"},{"product_id":"heatbed","title":"IDEX 3D Printer Aluminum Sheet Heatbed","description":"\u003cp\u003e\u003cbr\u003e\u003cstrong style=\"font-size: 1.4em;\"\u003eIDEX 3D Printer Aluminum Sheet Heatbed Specifications\u003c\/strong\u003e \u003cbr\u003e\u003c\/p\u003e\n\u003ctable width=\"530\" height=\"418\" style=\"font-size: 1.4em; float: left;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 266.91px;\"\u003e\u003cstrong\u003eName:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 269.132px;\"\u003eIDEX 3D Printer Aluminum Sheet Heatbed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 266.91px;\"\u003e\u003cstrong\u003eManufacturer:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 269.132px;\"\u003eTENLOG 3D Printer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 266.91px;\"\u003e\u003cstrong\u003eApplicable Model Number:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 269.132px;\"\u003eHands H2\/TL-D3 Pro\/TL-D5\/TL-D6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 266.91px;\"\u003e\u003cstrong\u003eColor:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 269.132px;\"\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 266.91px;\"\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 269.132px;\"\u003eAluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 266.91px;\"\u003e\u003cstrong\u003eSize:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 269.132px;\"\u003e310 × 310 × 310cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 266.91px;\"\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 269.132px;\"\u003e1kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 266.91px;\"\u003e\u003cstrong\u003ePower Source:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 269.132px;\"\u003eAC 24V 220W\u003cbr\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 266.91px;\"\u003e\u003cstrong\u003eThickness:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 269.132px;\"\u003e3mm\u003cbr\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 1.4em;\"\u003e\u003cstrong\u003eIDEX 3D Printer Aluminum Sheet Heatbed Description\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e ◉ 🐳【Excellent adhesion】\u003c\/strong\u003eThe microporous coating shows strong adhesion during the printing process. The carbon-silicon structure makes the model easy to fall off after the bed cools down.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e◉ 🐳【Free fixtures】\u003c\/strong\u003eIn order to fix all four corners, the TENLOG dual extruder 3d printer glass bed has 4 fixtures to prevent separation and can be used for a long time.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e◉ 🐳【Easy to clean】\u003c\/strong\u003eJust use a cloth\/paper towel soaked in alcohol or acetone to gently wipe the surface of the bed. Note: Do not wash in a warm state, it will not work properly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e◉ 🐳【Durable \u0026amp; Compatible】\u003c\/strong\u003eMade of special inorganic coating, hardness 8 Mohs, heat resistance temperature up to 400℃. Compatible with all TENLOG independent dual extruder 3d printers with heated beds.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e◉ 🐳【Compatible with lattice glass plate】\u003c\/strong\u003eThe heating bed combination includes a \u003cstrong\u003e\u003ca href=\"https:\/\/www.tenlog3dprinter.com\/products\/glass-plate-build-surface\"\u003elattice glass plate\u003c\/a\u003e\u003c\/strong\u003e suitable for high temperatures to form a flat and uniform surface. Better adhesion\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e◉ 🐳【Compatible with PEI steel plate】\u003c\/strong\u003eThe heating bed combination includes a \u003cstrong\u003e\u003ca href=\"https:\/\/www.tenlog3dprinter.com\/products\/3d-printerflexi-ble-steel-platformpei-build-surface\"\u003ePEI steel plate\u003c\/a\u003e\u003c\/strong\u003e suitable for high temperatures to form a flat and uniform surface.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e◉ 🐳【Compatibility】\u003c\/strong\u003eTENLOG 310mm x 310mm 12V or 24V hotbed is suitable for TENLOG TL-D3 Pro Printer\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e◉ 🐳【No welding required】\u003c\/strong\u003eTENLOG heating bed is equipped with an integrated 100K ohm NTC 3950 thermistor and welding power wire.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e◉ 🐳【3D accessories】\u003c\/strong\u003eThe best 3D printing starts with the best tools! TENLOG provides high-quality 3D printing supplies. If you have any problems with your hotbed, please let us know!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e◉ 🐳【Customized】\u003c\/strong\u003eThis aluminium heating bed is specially designed for TENLOG TL-D3 Pro Printer\u003c\/p\u003e\n\u003ch3\u003e\u003cspan style=\"color: #ff2a00;\"\u003eIDEX 3D Printer Aluminum Sheet Heatbed Precautions\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong data-mce-fragment=\"1\"\u003e◉ 🐳 \u003c\/strong\u003eThere is a protective film on the back of the TENLOG IDEX 3D Printer heating bed, please remove it before use.\u003c\/p\u003e\n\u003cdiv id=\"gtx-trans\" style=\"position: absolute; left: 183px; top: 797px;\"\u003e\n\u003cdiv class=\"gtx-trans-icon\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/div\u003e","brand":"TENLOG","offers":[{"title":"310mm*310mm*4mm","offer_id":47703875616961,"sku":"","price":62.99,"currency_code":"USD","in_stock":true},{"title":"510mm*510mm*4mm","offer_id":47703875748033,"sku":"","price":139.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0777\/6059\/4113\/products\/idex-3d-printer-aluminum-sheet-heatbed-758890.jpg?v=1763883962"},{"product_id":"tenlog-3d-printer-color-touch-screen","title":"TENLOG TJC 3D Printer Color Touch Screen","description":"\u003cstrong style=\"font-size: 1.4em;\"\u003eTENLOG 3D Printer Color Touch Screen Video\u003c\/strong\u003e \u003cbr\u003e \u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/kVoukb9WLMs\" style=\"font-size: 1.4em;\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003cbr\u003e\u003cstrong style=\"font-size: 1.4em;\"\u003eTENLOG 3D Printer Color Touch Screen Specifications\u003c\/strong\u003e \u003cbr\u003e\n\u003ctable width=\"530\" height=\"418\" style=\"font-size: 1.4em; float: left;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 266.91px;\" data-mce-style=\"width: 266.91px;\"\u003e\u003cstrong\u003eName:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 269.132px;\" data-mce-style=\"width: 269.132px;\"\u003eTENLOG TJC 3D Printer Color Touch Screen\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 266.91px;\" data-mce-style=\"width: 266.91px;\"\u003e\u003cstrong\u003eManufacturer:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 269.132px;\" data-mce-style=\"width: 269.132px;\"\u003eTENLOG 3D Printer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 266.91px;\" data-mce-style=\"width: 266.91px;\"\u003e\u003cstrong\u003eModel Number:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 269.132px;\" data-mce-style=\"width: 269.132px;\"\u003eTL-D3 Pro\/D3-V2\/TL-D5\/TL-D6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 266.91px;\" data-mce-style=\"width: 266.91px;\"\u003e\u003cstrong\u003eColor:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 269.132px;\" data-mce-style=\"width: 269.132px;\"\u003eblue\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 266.91px;\" data-mce-style=\"width: 266.91px;\"\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 269.132px;\" data-mce-style=\"width: 269.132px;\"\u003e\n\u003cp\u003eGlass\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 266.91px;\" data-mce-style=\"width: 266.91px;\"\u003e\u003cstrong\u003eSize:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 269.132px;\" data-mce-style=\"width: 269.132px;\"\u003e12 × 6 × 1cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 266.91px;\" data-mce-style=\"width: 266.91px;\"\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 269.132px;\" data-mce-style=\"width: 269.132px;\"\u003e0.3kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 266.91px;\" data-mce-style=\"width: 266.91px;\"\u003e\u003cstrong\u003ePower Source:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 269.132px;\" data-mce-style=\"width: 269.132px;\"\u003eAC 100-240V 50-60Hz\u003cbr\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 266.91px;\" data-mce-style=\"width: 266.91px;\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 269.132px;\" data-mce-style=\"width: 269.132px;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 266.91px;\" data-mce-style=\"width: 266.91px;\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 269.132px;\" data-mce-style=\"width: 269.132px;\"\u003e\u003cbr\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 266.91px;\" data-mce-style=\"width: 266.91px;\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 269.132px;\" data-mce-style=\"width: 269.132px;\"\u003e\u003cbr\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan style=\"font-size: 1.4em;\"\u003e\u003cstrong\u003eTENLOG 3D Printer Color Touch Screen Description\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e【No Edge Curling】Tenlog upgrade 3D printer touchscreen, UI\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e【Excellent 】Simple user interface, easy to operate\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv style=\"position: absolute; left: 0px; top: 35px;\" id=\"gtx-trans\"\u003e\n\u003cdiv class=\"gtx-trans-icon\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/div\u003e","brand":"TENLOG","offers":[{"title":"4.3 IN","offer_id":47703881056449,"sku":"","price":55.99,"currency_code":"USD","in_stock":true},{"title":"3.5 IN","offer_id":49336656724161,"sku":"","price":55.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0777\/6059\/4113\/products\/tenlog-tjc-3d-printer-color-touch-screen-379772.jpg?v=1763883961"},{"product_id":"3d-printer-heater-block-silicone-cover","title":"TENLOG IDEX 3D Printer Heater Block Silicone Cover","description":"\u003cstrong style=\"font-size: 1.4em;\"\u003eTENLOG 3D Printer Heater Block Silicone Cover Video\u003c\/strong\u003e \u003cbr\u003e \u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/QyV14TgWO6A\" style=\"font-size: 1.4em;\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003cbr\u003e\u003cstrong style=\"font-size: 1.4em;\"\u003eTENLOG 3D Printer Heater Block Silicone Cover Specifications\u003c\/strong\u003e \u003cbr\u003e\n\u003ctable width=\"530\" height=\"418\" style=\"font-size: 1.4em; float: left;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 266.91px;\" data-mce-style=\"width: 266.91px;\"\u003e\u003cstrong\u003eName:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 269.132px;\" data-mce-style=\"width: 269.132px;\"\u003e3D Printer Heater Block Silicone Cover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 266.91px;\" data-mce-style=\"width: 266.91px;\"\u003e\u003cstrong\u003eManufacturer:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 269.132px;\" data-mce-style=\"width: 269.132px;\"\u003eTENLOG \u003cspan data-mce-fragment=\"1\"\u003eIDEX \u003c\/span\u003e3D Printer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 266.91px;\" data-mce-style=\"width: 266.91px;\"\u003e\u003cstrong\u003eColor:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 269.132px;\" data-mce-style=\"width: 269.132px;\"\u003eBlack\/Blue\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 266.91px;\" data-mce-style=\"width: 266.91px;\"\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 269.132px;\" data-mce-style=\"width: 269.132px;\"\u003eSilica gel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 266.91px;\" data-mce-style=\"width: 266.91px;\"\u003e\u003cstrong\u003eSize:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 269.132px;\" data-mce-style=\"width: 269.132px;\"\u003e2.3x 2.3x 1.3cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 266.91px;\" data-mce-style=\"width: 266.91px;\"\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 269.132px;\" data-mce-style=\"width: 269.132px;\"\u003e45.0g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 266.91px;\" data-mce-style=\"width: 266.91px;\"\u003e\u003cstrong\u003ePacking:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 269.132px;\" data-mce-style=\"width: 269.132px;\"\u003e4 pcs\u003cbr\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 266.91px;\" data-mce-style=\"width: 266.91px;\"\u003e\u003cstrong\u003eMax Temperature:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 269.132px;\" data-mce-style=\"width: 269.132px;\"\u003e300℃\u003cbr\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 266.91px;\" data-mce-style=\"width: 266.91px;\"\u003e\u003cstrong\u003eFunction:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 269.132px;\" data-mce-style=\"width: 269.132px;\"\u003eKeep the hot end temperature stable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 266.91px;\" data-mce-style=\"width: 266.91px;\"\u003e\u003cstrong\u003eCompatibility:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 269.132px;\" data-mce-style=\"width: 269.132px;\"\u003eAll TENLOG IDEX 3D Printer And MK7 \/ MK8 MK9 and other original models\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan style=\"font-size: 1.4em;\"\u003e\u003cstrong\u003eTENLOG 3D Printer Heater Block Silicone Cover Description\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e◉ 🐳 \u003c\/span\u003e\u003c\/strong\u003eThe TENLOG IDEX 3D Printer silicone sleeve is made of heat-resistant, non-stick silicone material: it helps to keep the \u003cspan data-mce-fragment=\"1\"\u003eIDEX 3D Printer\u003c\/span\u003e nozzle running stably at high temperature. The silicone sleeve keeps your heating block clean, prevents scorching, blackening, and debris, thereby extending the life of the heating block and extruder, and helps to keep the hot end temperature stable. They are all made of non-stick silicone resin, which can withstand high temperature for a long time: 280℃, and can be used at a constant temperature of 300C without degradation. It is not recommended that the temperature exceed 300C.\u003cbr\u003e\u003cbr\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e◉ 🐳 \u003c\/span\u003e\u003c\/strong\u003eTENLOG 3D silicone sleeve is suitable for all MK8 M6 \u003cspan data-mce-fragment=\"1\"\u003eIDEX 3D Printer\u003c\/span\u003e. Suitable for using the hot end of the MK7\/8\/9 heater block. Including suitable for original models such as TENLOG IDEX 3D Printer and MK7 \/ MK8 MK9, including Creality Creality Ender 3\/3 Pro, Ender 5\/5 Pro, CR-10 \/ CR-10S \/ CR-10 S4 \/ CR-10 S5 \/ CR-10 Mini, Ender-2, Anet A8, MakerBot RepRap 3D \u003cspan data-mce-fragment=\"1\"\u003ePrinter\u003c\/span\u003e, etc.\u003cbr\u003eIt helps keep your heater block clean and free of burnt and blackened plastic.\u003c\/p\u003e\n\u003cdiv id=\"gtx-trans\" style=\"position: absolute; left: 311px; top: 1174.38px;\"\u003e\n\u003cdiv class=\"gtx-trans-icon\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e","brand":"TENLOG","offers":[{"title":"4 pcs Black","offer_id":47703883317441,"sku":"","price":8.9,"currency_code":"USD","in_stock":true},{"title":"4 pcs Blue","offer_id":47703883350209,"sku":"","price":8.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0777\/6059\/4113\/products\/tenlog-idex-3d-printer-heater-block-silicone-cover-539182.jpg?v=1763883961"},{"product_id":"tenlog-3d-printer-driver","title":"TENLOG 3D Printer Stepper Motor Driver Module","description":"\u003cstrong style=\"font-size: 1.4em;\"\u003eTENLOG 3D Printer Stepper Motor Driver Module Video\u003c\/strong\u003e \u003cbr\u003e \u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/U_qeLvw2JvM\" style=\"font-size: 1.4em;\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003cbr\u003e\u003cstrong style=\"font-size: 1.4em;\"\u003eTENLOG 3D Printer Stepper Motor Driver Module Specifications\u003c\/strong\u003e \u003cbr\u003e\n\u003ctable width=\"530\" height=\"418\" style=\"font-size: 1.4em; float: left;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 266.91px;\" data-mce-style=\"width: 266.91px;\"\u003e\u003cstrong\u003eName:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 269.132px;\" data-mce-style=\"width: 269.132px;\"\u003eTENLOG 3D Printer Stepper Motor Driver Module\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 266.91px;\" data-mce-style=\"width: 266.91px;\"\u003e\u003cstrong\u003eManufacturer:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 269.132px;\" data-mce-style=\"width: 269.132px;\"\u003eTENLOG 3D Printer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 266.91px;\" data-mce-style=\"width: 266.91px;\"\u003e\u003cstrong\u003eModel Number:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 269.132px;\" data-mce-style=\"width: 269.132px;\"\u003eHands H2\/TL-D3 Pro\/TL-D5\/TL-D6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 266.91px;\" data-mce-style=\"width: 266.91px;\"\u003e\u003cstrong\u003eColor:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 269.132px;\" data-mce-style=\"width: 269.132px;\"\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 266.91px;\" data-mce-style=\"width: 266.91px;\"\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 269.132px;\" data-mce-style=\"width: 269.132px;\"\u003eAluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 266.91px;\" data-mce-style=\"width: 266.91px;\"\u003e\u003cstrong\u003eSize:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 269.132px;\" data-mce-style=\"width: 269.132px;\"\u003e58 × 50 × 25cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 266.91px;\" data-mce-style=\"width: 266.91px;\"\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 269.132px;\" data-mce-style=\"width: 269.132px;\"\u003e17kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 266.91px;\" data-mce-style=\"width: 266.91px;\"\u003e\u003cstrong\u003ePower Source:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 269.132px;\" data-mce-style=\"width: 269.132px;\"\u003eAC 100-240V 50-60Hz\u003cbr\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 266.91px;\" data-mce-style=\"width: 266.91px;\"\u003e\u003cstrong\u003eMax Nozzle Temperature:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 269.132px;\" data-mce-style=\"width: 269.132px;\"\u003e300℃\u003cbr\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 266.91px;\" data-mce-style=\"width: 266.91px;\"\u003e\u003cstrong\u003eMax Hot bed Temperature:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 269.132px;\" data-mce-style=\"width: 269.132px;\"\u003e110℃\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 266.91px;\" data-mce-style=\"width: 266.91px;\"\u003e\u003cstrong\u003eFilament:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 269.132px;\" data-mce-style=\"width: 269.132px;\"\u003e1.75mm TPU, PVA, PLA, ABS, HIPS, WOOD, PETG, FLEXIBLE，Nylon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan style=\"font-size: 1.4em;\"\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003ch3\u003e\u003cspan style=\"font-size: 1.4em;\"\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003ch3\u003e\u003cspan style=\"font-size: 1.4em;\"\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003ch3\u003e\u003cspan style=\"font-size: 1.4em;\"\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003ch3\u003e\u003cspan style=\"font-size: 1.4em;\"\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003ch3\u003e\u003cspan style=\"font-size: 1.4em;\"\u003e\u003cstrong\u003eTENLOG 3D Printer Stepper Motor Driver Module Description\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e【No Edge Curling】Tenlog upgrade 3D printer glass bed, molds could stick on bed firmly without glue, avoiding the issue of print edges curling.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e【Excellent Flatness】upgrade 3D printer glass plate provides more flat and more smooth build surface than magnetic mat or pei sticker, ensuring high flatness for the bottom of model.\u003cbr\u003e【Super Convenient】Very easy to take off the model, no tools needed; This borosilicate glass bed could be fixed with middle sized clips and cleaned with alcohol or acetone at room temperature.\u003cbr\u003e【Compatibility 】Tenlog upgrade 3D printer glass bed is applicable with Creality CR-10 TENLOG TL-D3 Pro\u003c\/p\u003e\n\u003cdiv id=\"gtx-trans\" style=\"position: absolute; left: 15px; top: 845.667px;\"\u003e\n\u003cdiv class=\"gtx-trans-icon\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e","brand":"TENLOG","offers":[{"title":"TMC 2209 \/ 1 pcs","offer_id":47703884333249,"sku":"DRV-TMC2209-1PC","price":9.9,"currency_code":"USD","in_stock":true},{"title":"TMC 2209 \/ 7 pcs","offer_id":47703884366017,"sku":"DRV-TMC2209-7PC","price":35.9,"currency_code":"USD","in_stock":true},{"title":"TMC 2209 \/ 5 pcs","offer_id":47900612788417,"sku":"DRV-TMC2209-5PC","price":29.9,"currency_code":"USD","in_stock":true},{"title":"TMC5160 \/ 1 pcs","offer_id":47806866489537,"sku":"DRV-TMC5160-1PC","price":14.99,"currency_code":"USD","in_stock":true},{"title":"TMC5160 \/ 7 pcs","offer_id":47806866522305,"sku":"DRV-TMC5160-7PC","price":89.99,"currency_code":"USD","in_stock":true},{"title":"TMC5160 \/ 5 pcs","offer_id":47900612821185,"sku":"DRV-TMC5160-5PC","price":69.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0777\/6059\/4113\/products\/tenlog-3d-printer-stepper-motor-driver-module-798398.jpg?v=1763883962"},{"product_id":"filament-rounout-detection-sensor-module","title":"TENLOG 3D Printer Filament Rounout Detection Sensor Module for","description":"\u003cstrong style=\"font-size: 1.4em;\"\u003eTENLOG 3D Printer Extruder Hot End Metal Hot End Kit Video\u003c\/strong\u003e \u003cbr\u003e \u003ciframe style=\"font-size: 1.4em;\" src=\"https:\/\/www.youtube.com\/embed\/i1FuAa4p5vE\" height=\"315\" width=\"560\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003cbr\u003e\u003cstrong style=\"font-size: 1.4em;\"\u003eTENLOG 3D Printer Glass Plate Build Surface Specifications\u003c\/strong\u003e \u003cbr\u003e\n\u003ctable style=\"font-size: 1.4em; float: left;\" height=\"418\" width=\"530\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 266.91px;\" data-mce-style=\"width: 266.91px;\"\u003e\u003cstrong\u003eName:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 269.132px;\" data-mce-style=\"width: 269.132px;\"\u003e3D Printers cleaning nozzles Metal brush\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 266.91px;\" data-mce-style=\"width: 266.91px;\"\u003e\u003cstrong\u003eManufacturer:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 269.132px;\" data-mce-style=\"width: 269.132px;\"\u003eTENLOG 3D Printer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 266.91px;\" data-mce-style=\"width: 266.91px;\"\u003e\u003cstrong\u003eModel Number:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 269.132px;\" data-mce-style=\"width: 269.132px;\"\u003eHands H2\/TL-D3 Pro\/TL-D5\/TL-D6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 266.91px;\" data-mce-style=\"width: 266.91px;\"\u003e\u003cstrong\u003eColor:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 269.132px;\" data-mce-style=\"width: 269.132px;\"\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 266.91px;\" data-mce-style=\"width: 266.91px;\"\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 269.132px;\" data-mce-style=\"width: 269.132px;\"\u003eAluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 266.91px;\" data-mce-style=\"width: 266.91px;\"\u003e\u003cstrong\u003eSize:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 269.132px;\" data-mce-style=\"width: 269.132px;\"\u003e58 × 50 × 25cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 266.91px;\" data-mce-style=\"width: 266.91px;\"\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 269.132px;\" data-mce-style=\"width: 269.132px;\"\u003e17kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 266.91px;\" data-mce-style=\"width: 266.91px;\"\u003e\u003cstrong\u003ePower Source:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 269.132px;\" data-mce-style=\"width: 269.132px;\"\u003eAC 100-240V 50-60Hz\u003cbr\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 266.91px;\" data-mce-style=\"width: 266.91px;\"\u003e\u003cstrong\u003eMax Nozzle Temperature:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 269.132px;\" data-mce-style=\"width: 269.132px;\"\u003e300℃\u003cbr\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 266.91px;\" data-mce-style=\"width: 266.91px;\"\u003e\u003cstrong\u003eMax Hot bed Temperature:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 269.132px;\" data-mce-style=\"width: 269.132px;\"\u003e110℃\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 266.91px;\" data-mce-style=\"width: 266.91px;\"\u003e\u003cstrong\u003eFilament:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 269.132px;\" data-mce-style=\"width: 269.132px;\"\u003e1.75mm TPU, PVA, PLA, ABS, HIPS, WOOD, PETG, FLEXIBLE，Nylon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan style=\"font-size: 1.4em;\"\u003e\u003cstrong\u003eTENLOG 3D Printer Extruder Hot End Metal Hot End Kit Description\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e【No Edge Curling】Tenlog upgrade 3D printer glass bed, molds could stick on bed firmly without glue, avoiding the issue of print edges curling.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e【Excellent Flatness】upgrade 3D printer glass plate provides more flat and more smooth build surface than magnetic mat or pei sticker, ensuring high flatness for the bottom of model.\u003cbr\u003e【Super Convenient】Very easy to take off the model, no tools needed; This borosilicate glass bed could be fixed with middle sized clips and cleaned with alcohol or acetone at room temperature.\u003cbr\u003e【Compatibility 】Tenlog upgrade 3D printer glass bed is applicable with Creality CR-10 TENLOG TL-D3 Pro\u003c\/p\u003e","brand":"TENLOG","offers":[{"title":"Default Title","offer_id":47703884464321,"sku":"","price":13.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0777\/6059\/4113\/products\/tenlog-3d-printer-filament-rounout-detection-sensor-module-for-255665.jpg?v=1763883961"},{"product_id":"cleaning-nozzles-metal-brush","title":"TENLOG 3D Printers Cleaning Nozzles Metal Brush","description":"\u003cstrong style=\"font-size: 1.4em;\"\u003eTENLOG 3D Printers Cleaning Nozzles Metal Brush Video\u003c\/strong\u003e \u003cbr\u003e \u003ciframe style=\"font-size: 1.4em;\" src=\"https:\/\/www.youtube.com\/embed\/dyP_y2Hdkz0\" height=\"315\" width=\"560\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003cbr\u003e\u003cstrong style=\"font-size: 1.4em;\"\u003eTENLOG 3D Printers Cleaning Nozzles Metal Brush Specifications\u003c\/strong\u003e \u003cbr\u003e\n\u003ctable style=\"font-size: 1.4em; float: left;\" height=\"188\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 266.91px;\" data-mce-style=\"width: 266.91px;\"\u003e\u003cstrong\u003eName:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 269.132px;\" data-mce-style=\"width: 269.132px;\"\u003e3D Printers Cleaning Nozzles Metal Brush\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 266.91px;\" data-mce-style=\"width: 266.91px;\"\u003e\u003cstrong\u003eManufacturer:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 269.132px;\" data-mce-style=\"width: 269.132px;\"\u003eTENLOG 3D Printer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 266.91px;\" data-mce-style=\"width: 266.91px;\"\u003e\u003cstrong\u003eModel Number:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 269.132px;\" data-mce-style=\"width: 269.132px;\"\u003eHands H2\/TL-D3 Pro\/TL-D5\/TL-D6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 266.91px;\" data-mce-style=\"width: 266.91px;\"\u003e\u003cstrong\u003eColor:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 269.132px;\" data-mce-style=\"width: 269.132px;\"\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 266.91px;\" data-mce-style=\"width: 266.91px;\"\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 269.132px;\" data-mce-style=\"width: 269.132px;\"\u003eLron\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 266.91px;\" data-mce-style=\"width: 266.91px;\"\u003e\u003cstrong\u003eSize:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 269.132px;\" data-mce-style=\"width: 269.132px;\"\u003e\n\u003cspan data-mce-fragment=\"1\"\u003e10.1 \u003c\/span\u003e × \u003cspan data-mce-fragment=\"1\"\u003e5.8\u003c\/span\u003e × 4.3cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 266.91px;\" data-mce-style=\"width: 266.91px;\"\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 269.132px;\" data-mce-style=\"width: 269.132px;\"\u003e114g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 266.91px;\" data-mce-style=\"width: 266.91px;\"\u003e\u003cstrong\u003ePower Source:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 269.132px;\" data-mce-style=\"width: 269.132px;\"\u003eAC 100-240V 50-60Hz\u003cbr\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 266.91px;\" data-mce-style=\"width: 266.91px;\"\u003e\u003cstrong\u003eMax Nozzle Temperature:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 269.132px;\" data-mce-style=\"width: 269.132px;\"\u003e300℃\u003cbr\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 266.91px;\" data-mce-style=\"width: 266.91px;\"\u003e\u003cstrong\u003eMax Hot bed Temperature:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 269.132px;\" data-mce-style=\"width: 269.132px;\"\u003e110℃\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 266.91px;\" data-mce-style=\"width: 266.91px;\"\u003e\u003cstrong\u003eFilament:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 269.132px;\" data-mce-style=\"width: 269.132px;\"\u003e1.75mm TPU, PVA, PLA, ABS, HIPS, WOOD, PETG, FLEXIBLE，Nylon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"TENLOG","offers":[{"title":"All E1 and E2","offer_id":47703886299329,"sku":"","price":24.99,"currency_code":"USD","in_stock":true},{"title":"Left E1","offer_id":47703886332097,"sku":"","price":14.99,"currency_code":"USD","in_stock":true},{"title":"Right E2","offer_id":47703886364865,"sku":"","price":14.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0777\/6059\/4113\/products\/tenlog-3d-printers-cleaning-nozzles-metal-brush-169270.jpg?v=1763883961"},{"product_id":"all-metal-extruder-hgx-lite-extruder-2-0","title":"All Metal Extruder Hgx Lite Extruder 2.0 For TENLOG IDEX 3D Printer","description":"\u003cul class=\"a-unordered-list a-vertical a-spacing-mini\"\u003e\n\u003cli class=\"a-spacing-mini\"\u003e\n\u003cspan class=\"a-list-item\"\u003eCompatible with: The HGX-LITE extruder 2.0 suitable for TENLOG IDEX 3D Printer,\u003c\/span\u003e\u003cspan class=\"a-list-item\"\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli class=\"a-spacing-mini\"\u003e\u003cspan class=\"a-list-item\"\u003eImprove printing quality:A powerful gear ratio of 9.5:1 can instantly provide super strong driving force, with an extrusion force greater than 60N,Fast transmission,Precise proportion gear set, larger consumable contact area, reduced slip and wear, supporting 300mm\/s, high-speed printing, and stable output.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"a-spacing-mini\"\u003e\u003cspan class=\"a-list-item\"\u003eHigh quality materials:The extruder has undergone an all aluminum alloy oxidation treatment on the outer shell,High frequency quenching and hardening treatment，Internal hardened steel material of gears.Wear resistant and durable.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"a-spacing-mini\"\u003e\u003cspan class=\"a-list-item\"\u003eEasy Installation and use:The main structure consists of three large gears,Integral quenched nickel plated large gears,Larger extrusion wheel design,Increase the grip of consumables,reduce slipping phenomenon.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"a-spacing-mini\"\u003e\u003cspan class=\"a-list-item\"\u003eFilament Material compatibility:The switching and assembly of long-range and short-range printing meet different printing needs. Applicable consumables: PLA\/PETG\/TPU\/ABS\/PEEK nylon, etc.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"a-spacing-mini\"\u003e\n\u003ch4 class=\"html-h4 xdj266r x11i5rnm x1mh8g0r xexx8yu x4uap5 x18d9i69 xkhd6sd x1vvkbs x1heor9g x1qlqyl8 x1pd3egz x1a2a7pz xod5an3\"\u003e\u003cspan class=\"x193iq5w xeuugli x13faqbe x1vvkbs x1xmvt09 x1603h9y x1u7k74 xo1l8bm xzsf02u\"\u003eNema14 stepper motor， 60W ceramic heater, Bi-metal Heatbreak and \u003c\/span\u003e\u003c\/h4\u003e\n\u003ch4 class=\"productView-title\"\u003e\n\u003cspan\u003eHardened Steel Nozzle,\u003c\/span\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eEnable 300℃\u003c\/span\u003e\n\u003c\/h4\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Innocube3d","offers":[{"title":"HGX Lite 2 Extruder E1 with toolhead and VGA cable","offer_id":48389051482305,"sku":"HGX2-E1-TOOLHEAD-VGA","price":109.0,"currency_code":"USD","in_stock":true},{"title":"HGX Lite 2 Extruder E2 with  VGA cable","offer_id":48389051515073,"sku":"HGX2-E2-VGA","price":109.0,"currency_code":"USD","in_stock":true},{"title":"HGX Lite 2 Extruder E1 and E2","offer_id":48389051547841,"sku":"HGX2-E1E2-SET","price":199.99,"currency_code":"USD","in_stock":true},{"title":"HGX Lite 2 Extruder without VGA and board","offer_id":48391175798977,"sku":"HGX2-NO-VGA-BOARD","price":79.99,"currency_code":"USD","in_stock":true},{"title":"HGX Lite 2 Extrusion module","offer_id":48391175831745,"sku":"HGX2-MODULE","price":59.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0777\/6059\/4113\/files\/all-metal-extruder-hgx-lite-extruder-20-for-tenlog-idex-3d-printer-987959.jpg?v=1748330916"},{"product_id":"extruder-gear-assembly","title":"Extruder Gear Assembly for Bambu-Lab X1C P1P P1S 3D Printers, Golden RNC Nano-Coated Extruder Gear","description":"\u003cul class=\"a-unordered-list a-vertical a-spacing-mini\"\u003e\n\u003cli class=\"a-spacing-mini\"\u003e\u003cspan class=\"a-list-item\"\u003e【Heavy-duty Materials】Claw is a quality extruder gear assembly for Bambulab X1C\/P1P\/P1S 3D printers. Its extruder gear is made of golden RNC nano-coated hardened tool steel, which makes it hard and wear resistant. It provides a longer gear life while providing more precise filament control. The self lubricating property of its brass spur gear provides more wear resistance and a longer life span.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"a-spacing-mini\"\u003e\u003cspan class=\"a-list-item\"\u003e【Optimized Tooth Shape】With an optimized tooth shape, the Claw features more even filament flow, resulting in smoother print part outer wall surface.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"a-spacing-mini\"\u003e\u003cspan class=\"a-list-item\"\u003e【Quality Idler Arm】Made of AL 6061 T6 aluminum, the precision CNC-machined idler arm of  Claw is super lightweight and high-strength. Its ultra tight tolerance helps to remove unwanted movement on idler gear.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"a-spacing-mini\"\u003e\u003cspan class=\"a-list-item\"\u003e【Lighweigt Spur Gear】The 5-spoke lightweight designed of the spur gear contributes to less moving mass, less inertia, and better positional accuracy, giving you perfect prints.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"a-spacing-mini\"\u003e\u003cspan class=\"a-list-item\"\u003e【Unmatched Lubrication】 Package includes MoS2 grease to provide unmatched lubrication performance, silky smooth extrusion and thus longer gear life.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Innocube3d","offers":[{"title":"1 PCS","offer_id":49277963206849,"sku":"B100012","price":25.99,"currency_code":"USD","in_stock":true},{"title":"3 PCS","offer_id":49277963239617,"sku":"B100013","price":51.99,"currency_code":"USD","in_stock":true},{"title":"1 PCS for A1\/A1M","offer_id":49573127225537,"sku":null,"price":25.99,"currency_code":"USD","in_stock":true},{"title":"3 PCS for A1\/A1M","offer_id":49573127258305,"sku":null,"price":51.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0777\/6059\/4113\/files\/extruder-gear-assembly-for-bambu-lab-x1c-p1p-p1s-3d-printers-golden-rnc-nano-coated-extruder-gear-smoother-and-more-even-flow-longer-service-life-284177.jpg?v=1748330794"},{"product_id":"hotend-cooling-fan","title":"3D Printer DC5V 2510 Extruder Hotend Cooling Fan for Bambu Lab P1P\/P1S","description":"\u003cul class=\"a-unordered-list a-vertical a-spacing-mini\"\u003e\n\u003cli class=\"a-spacing-mini\"\u003e\u003cspan class=\"a-list-item\"\u003e【High-quality Materials】: Made of high quality plastics with high end bearings, Multi Fan Blades with Fluid Design，this 3D printer part cooling fan can run continuously for days at high speeds without hassle or concern.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"a-spacing-mini\"\u003e\u003cspan class=\"a-list-item\"\u003e【Excellent Heat Dissipation Efficiency】The Lab P1P\/P1S fan not only has strong wind power, but also effectively prevents blockage, thereby speeding up the curing process of the printed model and ensuring stable molding.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"a-spacing-mini\"\u003e\u003cspan class=\"a-list-item\"\u003e【Easy to Use】: Cable connector is already fitted and product is out-of-the-box ready for installation. Simply replace your old fan with this one, without the need to disassemble your motherboard or other components, saving you time and effort.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"a-spacing-mini\"\u003e\u003cspan class=\"a-list-item\"\u003e【Fit for】: This fan is fit for Lab P1P\/P1S 3D Printer. large air flow,low noise; long span life; good running stability and corrosion resistance.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"a-spacing-mini\"\u003e\u003cspan class=\"a-list-item\"\u003e【Commitment】: We are responsable for our every product, if you received desfective or did not work well, please feel free to contact us, and we will reply to you within 24 hours.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"INNOCUBE 3D","offers":[{"title":"1PCS","offer_id":49620926988481,"sku":null,"price":12.99,"currency_code":"USD","in_stock":true},{"title":"3PCS","offer_id":49620927021249,"sku":null,"price":20.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0777\/6059\/4113\/files\/3d-printer-dc5v-2510-extruder-hotend-cooling-fan-for-bambu-lab-p1pp1s-25x25x10mm-02a-current-for-3d-printer-cooling-fan-3d-printer-accessories-parts-with-70mm-c-431867.jpg?v=1748330792"},{"product_id":"a1-mini-extruder-gear","title":"Bambu Lab A1  A1 Mini Extruder Gear, with Aluminum Alloy Handle,A1 Mini xirbbo Extruder Gear Assembly","description":"\u003cul class=\"a-unordered-list a-vertical a-spacing-mini\"\u003e\n\u003cli class=\"a-spacing-mini\"\u003e\u003cspan class=\"a-list-item\"\u003eThe handle material is changed to aluminum alloy, which prolongs the service life of the handle and enhances the texture.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"a-spacing-mini\"\u003e\u003cspan class=\"a-list-item\"\u003e(1) One-piece shaft design ensures better concentricity of the gears, reduces eccentric rotation of the gears due to assembly, and safeguards the gears for more even filament delivery.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"a-spacing-mini\"\u003e\u003cspan class=\"a-list-item\"\u003e(2) Helical gear design, better meshing performance, smoother gear transmission, more linear power transmission. Transmission overlap is large, long meshing time, large contact area, so that the stress becomes smaller, thus improving the gear's carrying capacity, as well as extending the service life of the gear.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"a-spacing-mini\"\u003e\n\u003cspan class=\"a-list-item\"\u003e(3) Selection of high-strength mold steel as the material of the feed gear, the use of nano-coating surface treatment process, the Rockwell hardness of the gear as a whole HRC value of 62-65; the surface hardness HV value of 1000-1200 greatly ensures that the gear's strength, abrasion resistance and corrosion resistance, improve the gear's load-bearing capacity, and extend the service life of the gear.\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0777\/6059\/4113\/files\/71BgCUs3RhL._SL1500.jpg?v=1740886711\" alt=\"\"\u003e\u003c\/span\u003e\u003cspan class=\"a-list-item\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0777\/6059\/4113\/files\/61TrG02c-YL._SL1500.jpg?v=1740886710\" alt=\"\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0777\/6059\/4113\/files\/712j2e3qG0L._SL1500.jpg?v=1740886711\" alt=\"\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0777\/6059\/4113\/files\/617lxd1N-XL._SL1500.jpg?v=1740886711\" alt=\"\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0777\/6059\/4113\/files\/71qTPa1rNlL._SL1500.jpg?v=1740886711\" alt=\"\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0777\/6059\/4113\/files\/61DAfa7M1bL._SL1500.jpg?v=1740886711\" alt=\"\"\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Innocube3d","offers":[{"title":"1 PCS","offer_id":49277968613569,"sku":"","price":16.99,"currency_code":"USD","in_stock":true},{"title":"3 PCS","offer_id":49277968646337,"sku":"","price":36.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0777\/6059\/4113\/files\/bambu-lab-a1-mini-extruder-gear-with-aluminum-alloy-handlea1-mini-xirbbo-extruder-gear-assembly-cnc-pom-nano-coated-hardened-steel-for-bambu-lab-a1-mini-extrusi-403671.jpg?v=1748330795"},{"product_id":"ptfe-tube-with-tubing-cutter","title":"Compatible with Bambu Lab PTFE Tube 2.5mm ID×4mm OD, Length 5M\/ 16.4ft,  with Tubing Cutter","description":"\u003cul class=\"a-unordered-list a-vertical a-spacing-mini\"\u003e\n\u003cli class=\"a-spacing-mini\"\u003e\u003cspan class=\"a-list-item\"\u003e5m High-Temperature Resistant PTFE Filament Feeder Tube with Cutter for 3D Printers: This 5-meter PTFE tube, featuring a 2.5mm inner diameter and a 4mm inner diameter, comes with a convenient cutter. Its milky white, smooth surface ensures low friction and optimal filament feed. Compatible with Bambulab X1 series, K1 Max, and Ender 3 V3, this tube is ideal for 3D printing enthusiasts seeking durable and high-performance tubing for precise printing tasks.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"a-spacing-mini\"\u003e\u003cspan class=\"a-list-item\"\u003eSmooth, Low-Friction PTFE Tube for Enhanced 3D Printing: Upgrade your 3D printing setup with this 5-meter PTFE tube, inner diameters of 2.5mm and 4mm. Tight inner diameters cause drag with soft filaments like TPU and TPE. The tube’s milky white finish and smooth texture minimize friction, ensuring efficient filament flow. Designed for high-temperature environments, it’s compatible with models like Bambulab X1, P1P, and Ender 3 V3.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"a-spacing-mini\"\u003e\u003cspan class=\"a-list-item\"\u003eDurable PTFE Tubing for High-Performance 3D Printers: This 5-meter PTFE tube, featuring a 2.5mm inner diameter and a 4mm inner diameter. Its heat-resistant, milky white construction is both durable and smooth, reducing filament friction for consistent, high-quality prints. Ideal for models such as Bambulab X1, K1 Max, and Ender 3 V3.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"a-spacing-mini\"\u003e\u003cspan class=\"a-list-item\"\u003eBuilt to withstand high temperatures, the pipe ensures reliable filament transfer and consistent printing results even in challenging environments.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"a-spacing-mini\"\u003e\u003cspan class=\"a-list-item\"\u003eConstructed from high-quality materials, our Teflon tube offers exceptional durability and resistance to corrosion, providing long-lasting performance and peace of mind for your 3D printing projects.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Innocube3d","offers":[{"title":"Default Title","offer_id":49023519850689,"sku":"","price":16.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0777\/6059\/4113\/files\/compatible-with-bambu-lab-ptfe-tube-25mm-id4mm-od-length-5m-164ft-for-bambu-lab-ams-x1-x1c-p1p-p1s-a1-a1-mini-prusa-mmu3-direct-drive-extruder-cream-color-with--527777.jpg?v=1748330796"},{"product_id":"a1-led-light","title":"INNOCUBE3D  Compatible with Bambu-Lab A1 LED Light Strip Easy Installation High Brightness Light Bar","description":"\u003cul class=\"a-unordered-list a-vertical a-spacing-mini\"\u003e\n\u003cli class=\"a-spacing-mini\"\u003e\u003cspan class=\"a-list-item\"\u003eCompatibility: INNOCUBE3D Lux perfectly compatible with Bambu-Lab A1 3D printer. Seamless control of Panda Lux through the original screen of the printer\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"a-spacing-mini\"\u003e\u003cspan class=\"a-list-item\"\u003eSimple Installation: INNOCUBE3D Lux just needs to be attached to the printer, can be easily installed without any tools\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"a-spacing-mini\"\u003e\u003cspan class=\"a-list-item\"\u003eHigh Brightness: INNOCUBE3D Lux uses multiple LEDs to provide clear illumination for the printing area, allowing for a more intuitive observation of the progress of the printing model\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"a-spacing-mini\"\u003e\u003cspan class=\"a-list-item\"\u003eHeadlights: The front design of the INNOCUBE Lux light strip can prevent direct light from shining on the eyes, reduce glare, and protect vision\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Innocube3d","offers":[{"title":"Default Title","offer_id":49031761461441,"sku":"","price":12.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0777\/6059\/4113\/files\/innocube3d-compatible-with-bambu-lab-a1-led-light-strip-easy-installation-high-brightness-light-bar-622046.png?v=1763883937"},{"product_id":"swapmod-bambu-a1-auto-3d-printing","title":"INNOCUBE SwapMod – Bambu Lab A1用 自動ビルドプレート交換システム","description":"\u003cstyle\u003e\n.swapmod-page,.swapmod-page *{box-sizing:border-box}\n.swapmod-page{max-width:100%;overflow-x:hidden;color:#111827;font-family:inherit}\n.swapmod-page h2{margin:0 0 14px;color:#111827;font-size:28px;line-height:1.25;font-weight:800}\n.swapmod-page h3{margin:0 0 10px;color:#111827;font-size:19px;line-height:1.35;font-weight:800}\n.swapmod-page p{margin:0 0 14px;color:#374151;line-height:1.65}\n.swapmod-page ul{margin:12px 0 18px;padding-left:21px}\n.swapmod-page li{margin-bottom:8px;color:#374151;line-height:1.55}\n.swapmod-page a{color:#246b46;text-decoration:underline;text-underline-offset:3px}\n.swapmod-page img{display:block;max-width:100%;height:auto}\n.swapmod-page .sm-section{margin:34px 0}\n.swapmod-page .sm-hero{margin:20px 0 30px;padding:30px;border:1px solid #d7e7dc;border-radius:16px;background:linear-gradient(135deg,#f8fafc,#eef7f0)}\n.swapmod-page .sm-kicker,.swapmod-page .sm-badge{display:inline-block;margin-bottom:12px;padding:6px 10px;border-radius:6px;background:#e2f0e6;color:#246b46;font-size:12px;font-weight:800;line-height:1.4}\n.swapmod-page .sm-hero h2{font-size:34px;line-height:1.2}\n.swapmod-page .sm-intro{font-size:18px}\n.swapmod-page .sm-grid{display:grid;gap:16px}\n.swapmod-page .sm-grid-2{grid-template-columns:repeat(2,minmax(0,1fr))}\n.swapmod-page .sm-grid-3{grid-template-columns:repeat(3,minmax(0,1fr))}\n.swapmod-page .sm-grid-4{grid-template-columns:repeat(4,minmax(0,1fr))}\n.swapmod-page .sm-card{min-width:0;padding:20px;border:1px solid #e0e5e2;border-radius:12px;background:#fff;overflow-wrap:anywhere}\n.swapmod-page .sm-card\u003estrong{display:block;margin-bottom:8px;color:#111827}\n.swapmod-page .sm-card p:last-child{margin-bottom:0}\n.swapmod-page .sm-muted{color:#64748b;font-size:14px}\n.swapmod-page .sm-note{margin-top:18px;padding:16px;border:1px solid #cce3d3;border-radius:10px;background:#f0f8f2;color:#245b3a;line-height:1.6}\n.swapmod-page .sm-note p{color:#245b3a}\n.swapmod-page .sm-note p:last-child{margin-bottom:0}\n.swapmod-page .sm-options{padding:26px;border:1px solid #e0e5e2;border-radius:16px;background:#f8faf9}\n.swapmod-page .sm-featured{border:2px solid #28754b;background:#fff}\n.swapmod-page .sm-price{margin-bottom:12px;color:#111827;font-size:27px;font-weight:800}\n.swapmod-page .sm-option-name{font-size:14px;line-height:1.55}\n.swapmod-page .sm-assembly-note{padding-top:12px;border-top:1px solid #e5e7eb}\n.swapmod-page .sm-table-wrap{overflow-x:auto;margin:20px 0}\n.swapmod-page .sm-table{width:100%;min-width:560px;border-collapse:collapse;background:#fff;font-size:14px}\n.swapmod-page .sm-table th,.swapmod-page .sm-table td{padding:13px;border:1px solid #e0e5e2;text-align:left;vertical-align:top;line-height:1.5}\n.swapmod-page .sm-table th{color:#245b3a;background:#edf6ef;font-weight:800}\n.swapmod-page .sm-accessories{margin-top:20px;padding:20px;border:1px solid #e0e5e2;border-radius:12px;background:#fff}\n.swapmod-page .sm-dark{padding:28px;border-radius:16px;background:#14251c}\n.swapmod-page .sm-dark h2{color:#fff}\n.swapmod-page .sm-dark\u003ep{color:#d9e5dc}\n.swapmod-page .sm-dark .sm-card{background:#fff}\n.swapmod-page .sm-video{position:relative;height:0;padding-bottom:56.25%;overflow:hidden;border-radius:12px;background:#f1f5f2}\n.swapmod-page .sm-video iframe{position:absolute;top:0;left:0;width:100%;height:100%;border:0}\n.swapmod-page .sm-caption{margin-top:12px;color:#64748b;font-size:14px}\n.swapmod-page .sm-aswap{padding:26px;border:1px solid #d7e7dc;border-radius:16px;background:#f3f8f4}\n.swapmod-page .sm-status{display:inline-block;margin-top:12px;padding:4px 8px;border-radius:5px;font-size:11px;font-weight:800}\n.swapmod-page .sm-available{background:#e0f1e6;color:#246b46}\n.swapmod-page .sm-development{background:#fff1d6;color:#8a5c17}\n.swapmod-page .sm-links{margin-top:20px;padding:18px;border:1px solid #dce7df;border-radius:10px;background:#fff}\n.swapmod-page .sm-faq{padding-top:26px;border-top:1px solid #e0e5e2}\n.swapmod-page .sm-faq h3{margin-top:24px;font-size:17px}\n.swapmod-page .sm-final{padding:30px;border-radius:16px;background:#14251c;text-align:center}\n.swapmod-page .sm-final h2{color:#fff}\n.swapmod-page .sm-final p{color:#d9e5dc}\n.swapmod-page .sm-final strong{color:#fff}\n@media(max-width:900px){.swapmod-page .sm-grid-4{grid-template-columns:repeat(2,minmax(0,1fr))}}\n@media(max-width:768px){\n.swapmod-page h2{font-size:24px}\n.swapmod-page .sm-hero h2{font-size:28px}\n.swapmod-page .sm-intro{font-size:16px}\n.swapmod-page .sm-grid-2,.swapmod-page .sm-grid-3,.swapmod-page .sm-grid-4{grid-template-columns:1fr}\n.swapmod-page .sm-hero,.swapmod-page .sm-options,.swapmod-page .sm-dark,.swapmod-page .sm-aswap,.swapmod-page .sm-final{padding:20px}\n.swapmod-page .sm-card{padding:18px}\n}\n\u003c\/style\u003e\n\u003cdiv lang=\"ja\" class=\"swapmod-page\"\u003e\u003c!-- INTRODUCTION --\u003e\n\u003csection class=\"sm-hero\"\u003e\u003cspan class=\"sm-kicker\"\u003eBAMBU LAB A1用 自動ビルドプレート交換システム\u003c\/span\u003e\n\u003ch2\u003e手作業のプレート交換を減らして、次のプリントへ。\u003c\/h2\u003e\n\u003cp class=\"sm-intro\"\u003eプリントが終わっても、ビルドプレートを交換するまで次の作業が始められない。そんな待ち時間を減らすために、SwapModはBambu Lab A1に機械式のプレート交換機能を追加します。同じパーツの繰り返しプリントや、小ロット生産での手作業を減らせます。\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eプレート交換はSwapMod。作業の準備・管理を支えるのはASWAP。\u003c\/strong\u003e お使いの構成に合ったファイル準備ツールとプリンター管理ツールをご利用ください。お困りの際は、INNOCUBEが直接サポートします。\u003c\/p\u003e\n\u003cdiv class=\"sm-grid sm-grid-3\"\u003e\n\u003cdiv class=\"sm-card\"\u003e\u003cstrong\u003e機械式プレート交換\u003c\/strong\u003e\n\u003cp class=\"sm-muted\"\u003eA1本体の動作を利用して、プレート交換機構を作動させます。\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sm-card\"\u003e\u003cstrong\u003e用途に合った構成を選択\u003c\/strong\u003e\n\u003cp class=\"sm-muted\"\u003eパーツを自分でプリントするDIYキット、またはプリント済みパーツを含むキットセットから選べます。\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sm-card\"\u003e\u003cstrong\u003e取り付けをサポート\u003c\/strong\u003e\n\u003cp class=\"sm-muted\"\u003eキット選び、組み立て、プレートのセット、初回のプリント準備までサポートします。\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sm-note\"\u003e\n\u003cp\u003e\u003cstrong\u003eDIYキットは57.99米ドルから。DIY＋PEIプレート3枚セットは105.99米ドル。\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eパーツはご自身でプリントしてください。\u003c\/strong\u003e どちらのDIYオプションにも、3MFファイルと組み立て用パックが含まれます。ビルドプレートが付属するのは「3 PCS PEI」オプションのみです。プリント済みパーツとプリンター本体は付属しません。\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\u003c!-- CONFIGURATION GUIDE --\u003e\n\u003csection class=\"sm-section sm-options\"\u003e\n\u003ch2\u003eご自身に合ったSwapModの構成を選ぶ\u003c\/h2\u003e\n\u003cp\u003eお手持ちのビルドプレートに合わせて、DIYオプションをお選びください。どちらのDIYオプションも、パーツのプリント、SwapModの組み立て、A1への取り付けが必要です。\u003c\/p\u003e\n\u003cdiv class=\"sm-grid sm-grid-2\"\u003e\n\u003cdiv class=\"sm-card\"\u003e\u003cspan class=\"sm-badge\"\u003eDIY・お手持ちのプレートを使用\u003c\/span\u003e\n\u003ch3\u003eDIY組み立てキット\u003c\/h3\u003e\n\u003cp class=\"sm-price\"\u003e$57.99\u003c\/p\u003e\n\u003cp class=\"sm-option-name\"\u003e\u003cstrong\u003e選択するオプション：3MF Print Files + Assembly Pack (Screws + Tools)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSwapModの3MFプリントファイル\u003c\/li\u003e\n\u003cli\u003e組み立て用金具・工具\u003c\/li\u003e\n\u003cli\u003eINNOCUBEによる取り付け・セットアップの直接サポート\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"sm-assembly-note\"\u003e\n\u003cp\u003e\u003cstrong\u003eパーツはご自身でプリントしてください。\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eプリント済みパーツ、ビルドプレート、プリンター本体は付属しません。使用する構成に適したビルドプレートをご用意ください。\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp class=\"sm-muted\"\u003eSwapModを自分で組み立てたい方で、必要な追加プレートをすでにお持ちの方に適しています。\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sm-card sm-featured\"\u003e\u003cspan class=\"sm-badge\"\u003eDIY・PEIプレート3枚付き\u003c\/span\u003e\n\u003ch3\u003eDIYキット＋PEIプレート3枚\u003c\/h3\u003e\n\u003cp class=\"sm-price\"\u003e$105.99\u003c\/p\u003e\n\u003cp class=\"sm-option-name\"\u003e\u003cstrong\u003e選択するオプション：3MF Files+Assembly Pack+3 PCS PEI\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSwapModの3MFプリントファイル\u003c\/li\u003e\n\u003cli\u003e組み立て用金具・工具\u003c\/li\u003e\n\u003cli\u003ePEIビルドプレート3枚\u003c\/li\u003e\n\u003cli\u003eINNOCUBEによる取り付け・セットアップの直接サポート\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"sm-assembly-note\"\u003e\n\u003cp\u003e\u003cstrong\u003eパーツはご自身でプリントしてください。\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eプリント済みパーツとプリンター本体は付属しません。組み立てと取り付けが必要です。\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp class=\"sm-muted\"\u003eDIY組み立て用パックと追加のPEIビルドプレート3枚を、まとめて購入したい方に適しています。\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sm-table-wrap\"\u003e\n\u003ctable class=\"sm-table\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth scope=\"col\"\u003e付属品・必要な準備\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eDIY組み立てキット\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eDIYキット＋PEIプレート3枚\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003e3MFプリントファイル\u003c\/th\u003e\n\u003ctd\u003e付属\u003c\/td\u003e\n\u003ctd\u003e付属\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003e組み立て用金具・工具\u003c\/th\u003e\n\u003ctd\u003e付属\u003c\/td\u003e\n\u003ctd\u003e付属\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePEIビルドプレート\u003c\/th\u003e\n\u003ctd\u003e付属しません\u003c\/td\u003e\n\u003ctd\u003e3枚付属\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSwapModのプリントパーツ\u003c\/th\u003e\n\u003ctd\u003eご自身でプリント\u003c\/td\u003e\n\u003ctd\u003eご自身でプリント\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003e組み立て・取り付け\u003c\/th\u003e\n\u003ctd\u003e必要\u003c\/td\u003e\n\u003ctd\u003e必要\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBambu Lab A1本体\u003c\/th\u003e\n\u003ctd\u003e付属しません\u003c\/td\u003e\n\u003ctd\u003e付属しません\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sm-accessories\"\u003e\n\u003ch3\u003eプリント済みパーツを含むキットをご希望の方へ\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eA1 Swapmod Kit+5 PCS PEI\u003c\/strong\u003e は、SwapModの実物キットとPEIビルドプレート5枚のセットです。\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUltimate Bundle\u003c\/strong\u003e は、SwapModの実物キット、PEIビルドプレート5枚、メタルパックのセットです。\u003c\/p\u003e\n\u003cp\u003e組み立てと取り付けが必要です。プリンター本体は付属しません。上部の商品オプションで該当するセットを選び、商品画像と付属品をご確認のうえご注文ください。\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sm-accessories\"\u003e\n\u003ch3\u003e交換・追加組み立て用パック\u003c\/h3\u003e\n\u003cp\u003e以下のオプションは、SwapModの構成に必要なその他の部品をすでにお持ちの方向けです。\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eAssembly Pack (Screws + Tools)\u003c\/strong\u003e — 組み立て用金具と工具のみです。3MFファイル、プリント済みパーツ、ビルドプレート、プリンター本体は付属しません。\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePEI×5\u003c\/strong\u003e — ビルドプレート5枚です。SwapMod本体とプリンター本体は付属しません。\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFarm Assembly Pack (Buy 4 Get 1 Free Screws + Tools)\u003c\/strong\u003e — 追加の組み立て用に、組み立て用パックをまとめたセットです。4セット購入で1セット無料。SwapModの一式がそろうキットではありません。\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cp style=\"margin-top: 18px; margin-bottom: 0;\" class=\"sm-muted\"\u003eこの説明に記載している価格は米ドルです。最新の価格は、選択した商品オプションとチェックアウト画面でご確認ください。\u003c\/p\u003e\n\u003c\/section\u003e\n\u003c!-- PRODUCT DEMONSTRATION --\u003e\n\u003csection class=\"sm-section\"\u003e\n\u003ch2\u003eSwapModの動作を見る\u003c\/h2\u003e\n\u003cdiv class=\"sm-video\"\u003e\u003ciframe loading=\"lazy\" title=\"INNOCUBE SwapMod — Bambu Lab A1用 自動ビルドプレート交換システム\" src=\"https:\/\/www.youtube.com\/embed\/6ziXGXkUKpA\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003cp class=\"sm-caption\"\u003eプレート交換機構の動作と、事前に準備した繰り返しプリントの流れをご覧いただけます。\u003c\/p\u003e\n\u003c\/section\u003e\n\u003c!-- HARDWARE AND SOFTWARE --\u003e\n\u003csection class=\"sm-section sm-dark\"\u003e\n\u003ch2\u003eSwapMod＋ASWAP\u003c\/h2\u003e\n\u003cp\u003e実際のプレート交換とプリントジョブの準備は、それぞれ異なる役割を担います。\u003c\/p\u003e\n\u003cdiv class=\"sm-grid sm-grid-2\"\u003e\n\u003cdiv class=\"sm-card\"\u003e\u003cspan class=\"sm-badge\"\u003eハードウェア\u003c\/span\u003e\n\u003ch3\u003eSwapMod\u003c\/h3\u003e\n\u003cp\u003e機械式のプレート交換システムです。あらかじめ設定したプリンターの動作によって機構が作動し、ビルドプレートを交換します。\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sm-card\"\u003e\u003cspan class=\"sm-badge\"\u003eソフトウェアツール\u003c\/span\u003e\n\u003ch3\u003eASWAP\u003c\/h3\u003e\n\u003cp\u003e繰り返しプリント用ファイルの準備や、プリント作業の管理を支えるツールです。WebツールとWindowsアプリでは、利用できる機能が異なります。\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\u003c!-- WORKFLOW --\u003e\n\u003csection class=\"sm-section\"\u003e\n\u003ch2\u003eSwapModはどのように動作しますか？\u003c\/h2\u003e\n\u003cp\u003eSwapModは、Bambu Lab A1本体の動作を利用して、機械式のプレート交換を行います。プリントファイルと作業手順は、SwapModの動作に合わせて事前に準備する必要があります。\u003c\/p\u003e\n\u003cdiv class=\"sm-grid sm-grid-3\"\u003e\n\u003cdiv class=\"sm-card\"\u003e\u003cspan class=\"sm-badge\"\u003eステップ1\u003c\/span\u003e\n\u003ch3\u003eプリントする\u003c\/h3\u003e\n\u003cp\u003eSwapModでの使用に合わせて準備したジョブを、A1でプリントします。\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sm-card\"\u003e\u003cspan class=\"sm-badge\"\u003eステップ2\u003c\/span\u003e\n\u003ch3\u003eプレートを交換する\u003c\/h3\u003e\n\u003cp\u003eあらかじめ設定した一連の動作によってSwapModが作動し、ビルドプレートを交換します。\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sm-card\"\u003e\u003cspan class=\"sm-badge\"\u003eステップ3\u003c\/span\u003e\n\u003ch3\u003e次のプリントへ進む\u003c\/h3\u003e\n\u003cp\u003e準備した繰り返しプリント用ファイル、または対応するタスク実行手順に従ってプリントを続けます。\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sm-note\"\u003e\u003cstrong\u003e使用前に作業手順を準備し、動作を確認してください。\u003c\/strong\u003e ハードウェアを取り付けるだけでは、プリントファイルの設定や次のジョブの自動スケジュールは行われません。\u003c\/div\u003e\n\u003c\/section\u003e\n\u003c!-- USE CASES --\u003e\n\u003csection class=\"sm-section\"\u003e\n\u003ch2\u003eA1を1台お使いの方にも、小規模な工房にも\u003c\/h2\u003e\n\u003cdiv class=\"sm-grid sm-grid-3\"\u003e\n\u003cdiv class=\"sm-card\"\u003e\u003cspan class=\"sm-badge\"\u003e個人・ものづくり\u003c\/span\u003e\n\u003ch3\u003e同じパーツを繰り返しプリント\u003c\/h3\u003e\n\u003cp\u003eA1で同じパーツを複数作る際の、手作業によるプレート交換を減らせます。\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sm-card\"\u003e\u003cspan class=\"sm-badge\"\u003e小規模ビジネス\u003c\/span\u003e\n\u003ch3\u003e小ロットの注文に対応\u003c\/h3\u003e\n\u003cp\u003e商品、アクセサリーなどの小ロット製作に向けて、繰り返しプリントを準備できます。\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sm-card\"\u003e\u003cspan class=\"sm-badge\"\u003e小規模な工房\u003c\/span\u003e\n\u003ch3\u003eプレート交換の手間を減らす\u003c\/h3\u003e\n\u003cp\u003eA1にプレート交換機能を追加し、事前に準備したジョブ間の繰り返し作業を減らせます。\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\u003c!-- BENEFITS --\u003e\n\u003csection class=\"sm-section\"\u003e\n\u003ch2\u003eINNOCUBE SwapModを選ぶ理由\u003c\/h2\u003e\n\u003cdiv class=\"sm-grid sm-grid-4\"\u003e\n\u003cdiv class=\"sm-card\"\u003e\u003cstrong\u003e機械式の設計\u003c\/strong\u003e\n\u003cp class=\"sm-muted\"\u003eあらかじめ設定したプリンターの動作でプレートを交換するため、追加の電子コントローラーは不要です。\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sm-card\"\u003e\u003cstrong\u003eカスタムファームウェア不要\u003c\/strong\u003e\n\u003cp class=\"sm-muted\"\u003eBambu Lab A1のカスタムファームウェアは必要ありません。\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sm-card\"\u003e\u003cstrong\u003eDIYキットと実物キットから選択\u003c\/strong\u003e\n\u003cp class=\"sm-muted\"\u003eパーツを自分でプリントするか、プリント済みパーツを含むキットを購入するかを選べます。\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sm-card\"\u003e\u003cstrong\u003e担当者による直接サポート\u003c\/strong\u003e\n\u003cp class=\"sm-muted\"\u003e構成選び、取り付け、セットアップについて、INNOCUBEに直接ご相談いただけます。\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\u003c!-- ASWAP --\u003e\n\u003csection class=\"sm-section sm-aswap\"\u003e\n\u003ch2\u003eプリント作業を支えるASWAPツール\u003c\/h2\u003e\n\u003cp\u003eASWAPツールを使って、SwapModでの繰り返しプリントの準備や、プリント作業の管理を行えます。\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWindows版ASWAPは現在ベータ版です。\u003c\/strong\u003e Webでのファイル準備とWindowsでのプリンター管理は、それぞれ別のツールです。対応機能は、最新のダウンロード情報と操作説明でご確認ください。\u003c\/p\u003e\n\u003cdiv class=\"sm-grid sm-grid-3\"\u003e\n\u003cdiv class=\"sm-card\"\u003e\u003cstrong\u003eWebでのファイル準備\u003c\/strong\u003e\n\u003cp class=\"sm-muted\"\u003eWebツールでSwapModの繰り返しプリント用ファイルを準備できます。ツールの操作説明に従ってご利用ください。\u003c\/p\u003e\n\u003cspan class=\"sm-status sm-available\"\u003e利用可能\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv class=\"sm-card\"\u003e\u003cstrong\u003eWindowsでのプリンター操作\u003c\/strong\u003e\n\u003cp class=\"sm-muted\"\u003e対応プリンターに接続し、開始、一時停止、再開、停止の操作を行えます。\u003c\/p\u003e\n\u003cspan class=\"sm-status sm-available\"\u003e利用可能・ベータ版\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv class=\"sm-card\"\u003e\u003cstrong\u003eプリント履歴\u003c\/strong\u003e\n\u003cp class=\"sm-muted\"\u003e現在のWindowsアプリのプリント履歴から、プリント作業の記録を確認できます。\u003c\/p\u003e\n\u003cspan class=\"sm-status sm-available\"\u003e利用可能・ベータ版\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv class=\"sm-card\"\u003e\u003cstrong\u003eフィラメント管理\u003c\/strong\u003e\n\u003cp class=\"sm-muted\"\u003eフィラメント、AMS Lite、外部スプールを管理する追加ツールを開発中です。\u003c\/p\u003e\n\u003cspan class=\"sm-status sm-development\"\u003e開発中\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv class=\"sm-card\"\u003e\u003cstrong\u003eプレート管理\u003c\/strong\u003e\n\u003cp class=\"sm-muted\"\u003eビルドプレートや繰り返し生産の作業手順を整理する追加ツールを開発中です。\u003c\/p\u003e\n\u003cspan class=\"sm-status sm-development\"\u003e開発中\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv class=\"sm-card\"\u003e\u003cstrong\u003eタスクスケジュール・SwapMod連携\u003c\/strong\u003e\n\u003cp class=\"sm-muted\"\u003eWindowsアプリ向けに、スケジュール機能とハードウェアの動作連携を開発中です。\u003c\/p\u003e\n\u003cspan class=\"sm-status sm-development\"\u003e開発中\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sm-links\"\u003e\u003cstrong\u003eツールと使い方はこちら：\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca rel=\"noopener noreferrer\" href=\"http:\/\/aswapsc.com\" target=\"_blank\"\u003eASWAP Webを開く\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.innocube3d.com\/pages\/download\"\u003eWindows版ASWAPをダウンロード\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca rel=\"noopener noreferrer\" href=\"https:\/\/www.youtube.com\/watch?v=SZ8JFJAtceU\" target=\"_blank\"\u003eASWAP V153.11のデモ動画を見る\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca rel=\"noopener noreferrer\" href=\"https:\/\/simplyprint.io\/integrations\/innocube3d-swapmod\" target=\"_blank\"\u003eSimplyPrintの連携ページを見る\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\u003c!-- COMPATIBILITY --\u003e\n\u003csection class=\"sm-section\"\u003e\n\u003ch2\u003eBambu Lab A1専用設計\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e対応プリンター：\u003c\/strong\u003e標準サイズのBambu Lab A1用に設計されています。\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eファームウェア：\u003c\/strong\u003eカスタムファームウェアは不要です。\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e電子部品：\u003c\/strong\u003e追加の電子部品のはんだ付けは不要です。\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e取り付け：\u003c\/strong\u003e既存の取り付け箇所を使用するため、プリンターの切断や穴あけは不要です。\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAMS Lite：\u003c\/strong\u003eSwapModはフィラメント供給システムとは独立して動作し、AMS Liteを使用するプリントと併用できます。\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"sm-note\"\u003e\u003cstrong\u003eBambu Lab A1 Miniには対応していません。\u003c\/strong\u003e 本製品は標準サイズのA1専用です。\u003c\/div\u003e\n\u003c\/section\u003e\n\u003c!-- INSTALLATION --\u003e\n\u003csection class=\"sm-section\"\u003e\n\u003ch2\u003e取り付けと初回セットアップ\u003c\/h2\u003e\n\u003cp\u003eどちらのDIYオプションも、機構を組み立てる前に、付属の3MFファイルからパーツをプリントしてください。必要なパーツがそろった後の取り付け手順は、DIYキットと実物キットで共通です。\u003c\/p\u003e\n\u003cp\u003e取り付け・セットアップにかかる時間は、選択した構成、準備状況、経験によって異なります。作業を始める前に、取り付け動画をご覧ください。\u003c\/p\u003e\n\u003cdiv class=\"sm-grid sm-grid-3\"\u003e\n\u003cdiv class=\"sm-card\"\u003e\u003cspan class=\"sm-badge\"\u003e1・準備\u003c\/span\u003e\n\u003ch3\u003e必要なパーツをそろえる\u003c\/h3\u003e\n\u003cp\u003eDIYキットの場合は必要なパーツをプリントし、組み立て用パックとビルドプレートを用意します。\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sm-card\"\u003e\u003cspan class=\"sm-badge\"\u003e2・取り付け\u003c\/span\u003e\n\u003ch3\u003e取り付け動画に沿って作業する\u003c\/h3\u003e\n\u003cp\u003eSwapModを組み立ててA1に取り付け、説明に従ってプレートをセットします。\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sm-card\"\u003e\u003cspan class=\"sm-badge\"\u003e3・テスト\u003c\/span\u003e\n\u003ch3\u003e立ち会いながら動作を確認する\u003c\/h3\u003e\n\u003cp\u003e長時間の連続プリントを準備する前に、プリントファイルとプレート交換の動作を確認します。\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sm-links\"\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca rel=\"noopener noreferrer\" href=\"https:\/\/www.youtube.com\/watch?v=mU1yKMi9Yl4\" target=\"_blank\"\u003eSwapModの取り付け動画を見る\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca rel=\"noopener noreferrer\" href=\"https:\/\/youtube.com\/shorts\/HEb2zKpvHUA\" target=\"_blank\"\u003e取り付け後のプレートのセット方法を見る\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.innocube3d.com\/pages\/download\"\u003eASWAPをダウンロード\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.innocube3d.com\/pages\/contact\"\u003eINNOCUBEサポートに問い合わせる\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\u003c!-- SETUP GUIDANCE --\u003e\n\u003csection class=\"sm-section\"\u003e\n\u003ch2\u003e連続プリントの前に、ご自身の環境で動作確認を\u003c\/h2\u003e\n\u003cp\u003e正しい組み立て、プレートの状態、準備したプリントファイルは、いずれもプレート交換の動作に影響します。まずはご自身のA1で、立ち会いながらプリントとプレート交換をテストしてください。\u003c\/p\u003e\n\u003cp\u003eビルドプレートを清潔に保ち、セットアップ手順に従ってご使用ください。取り付けやプレート交換の動作でお困りの際は、INNOCUBEにご相談ください。\u003c\/p\u003e\n\u003c\/section\u003e\n\u003c!-- SUPPORT --\u003e\n\u003csection class=\"sm-section\"\u003e\n\u003ch2\u003eどの構成を選べばよいか迷ったら\u003c\/h2\u003e\n\u003cp\u003eA1を何台お使いか、追加のビルドプレートをすでにお持ちか、パーツを自分でプリントしたいかをお知らせください。用途に合った構成選びをお手伝いします。\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.innocube3d.com\/pages\/contact\"\u003eご注文前にINNOCUBEへ相談する\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/section\u003e\n\u003c!-- FAQ --\u003e\n\u003csection class=\"sm-section sm-faq\"\u003e\n\u003ch2\u003eよくあるご質問\u003c\/h2\u003e\n\u003ch3\u003eどちらのDIYオプションを選べばよいですか？\u003c\/h3\u003e\n\u003cp\u003e適切なビルドプレートをすでにお持ちの場合は、\u003cstrong\u003e3MF Print Files + Assembly Pack (Screws + Tools)\u003c\/strong\u003e をお選びください。PEIビルドプレート3枚も必要な場合は、\u003cstrong\u003e3MF Files+Assembly Pack+3 PCS PEI\u003c\/strong\u003e をお選びください。どちらもパーツを自分でプリントする必要があります。\u003c\/p\u003e\n\u003ch3\u003eDIYオプションにプリント済みパーツは含まれますか？\u003c\/h3\u003e\n\u003cp\u003eいいえ。SwapModの3MFプリントファイルと組み立て用パックをお届けしますので、パーツはご自身でプリントしてください。プリント済みパーツとプリンター本体は付属しません。\u003c\/p\u003e\n\u003ch3\u003e基本のDIYオプションにPEIビルドプレートは含まれますか？\u003c\/h3\u003e\n\u003cp\u003eいいえ。\u003cstrong\u003e3MF Print Files + Assembly Pack (Screws + Tools)\u003c\/strong\u003e にビルドプレートは付属しません。\u003cstrong\u003e3MF Files+Assembly Pack+3 PCS PEI\u003c\/strong\u003e には、PEIビルドプレート3枚が付属します。\u003c\/p\u003e\n\u003ch3\u003eプリント済みパーツを含むキットは購入できますか？\u003c\/h3\u003e\n\u003cp\u003e実物キットのセットとして、\u003cstrong\u003eA1 Swapmod Kit+5 PCS PEI\u003c\/strong\u003e と \u003cstrong\u003eUltimate Bundle\u003c\/strong\u003e をご用意しています。選択したセットの商品画像と付属品をご確認ください。組み立てと取り付けが必要です。\u003c\/p\u003e\n\u003ch3\u003eプリンター本体は付属しますか？\u003c\/h3\u003e\n\u003cp\u003eいいえ。取り付け画像やデモ画像に写っているBambu Lab A1本体は付属しません。\u003c\/p\u003e\n\u003ch3\u003eAssembly Packが単品で販売されているのはなぜですか？\u003c\/h3\u003e\n\u003cp\u003e必要なファイルとプリント済みパーツをすでにお持ちで、追加の組み立て、交換、拡張用に金具と工具が必要な方向けです。単品のAssembly Packは、SwapModの一式がそろうキットではありません。\u003c\/p\u003e\n\u003ch3\u003eSwapModとASWAPの違いは何ですか？\u003c\/h3\u003e\n\u003cp\u003eSwapModは、機械式のプレート交換ハードウェアです。ASWAPは、ファイルの準備やプリンターの作業管理を支えるソフトウェアツールです。WebツールとWindowsアプリでは、利用できる機能が異なります。\u003c\/p\u003e\n\u003ch3\u003eSwapModを取り付けるだけで、プリントジョブが自動的にスケジュールされますか？\u003c\/h3\u003e\n\u003cp\u003eいいえ。対応するプリントファイルと作業手順を準備する必要があります。Windowsベータ版アプリの追加タスクスケジュール機能とSwapMod連携機能は開発中です。使用するツールの最新の操作説明に従ってください。\u003c\/p\u003e\n\u003ch3\u003eSwapModにはファームウェアの変更が必要ですか？\u003c\/h3\u003e\n\u003cp\u003eいいえ。SwapModは機械的な動作と、あらかじめ設定したプリンターの動作手順によって作動します。A1のカスタムファームウェアは不要です。\u003c\/p\u003e\n\u003ch3\u003eSwapModにははんだ付けが必要ですか？\u003c\/h3\u003e\n\u003cp\u003eいいえ。機械式プレート交換システムのため、追加の電子部品をはんだ付けする必要はありません。\u003c\/p\u003e\n\u003ch3\u003eSwapModはAMS Liteと併用できますか？\u003c\/h3\u003e\n\u003cp\u003eはい。SwapModはフィラメント供給システムとは独立して動作します。AMS Liteを使用するジョブは、作業手順の説明に従って準備してください。\u003c\/p\u003e\n\u003ch3\u003eSwapModはA1 Miniに対応していますか？\u003c\/h3\u003e\n\u003cp\u003eいいえ。本製品は標準サイズのBambu Lab A1専用です。\u003c\/p\u003e\n\u003ch3\u003eSwapModを使うには、プリントファームが必要ですか？\u003c\/h3\u003e\n\u003cp\u003eいいえ。A1を1台使って繰り返しプリントを行う方にも、小ロット生産を行う小規模な工房にも役立ちます。\u003c\/p\u003e\n\u003ch3\u003eDIYキットと実物キットで、取り付け手順は異なりますか？\u003c\/h3\u003e\n\u003cp\u003e必要なパーツがそろった後の取り付け手順は共通です。DIYキットをご購入の場合は、組み立て前にパーツをご自身でプリントしてください。\u003c\/p\u003e\n\u003ch3\u003eASWAPは現在も開発中ですか？\u003c\/h3\u003e\n\u003cp\u003eはい。Windows版ASWAPは現在ベータ版です。現在提供されているツールをご利用いただけますが、追加の管理機能、スケジュール機能、連携機能は開発中です。最新のリリースはダウンロードページでご確認ください。\u003c\/p\u003e\n\u003ch3\u003eINNOCUBEに取り付けの相談はできますか？\u003c\/h3\u003e\n\u003cp\u003eはい。構成選び、組み立て、プレートのセット、初回セットアップについて、お気軽にご相談ください。\u003c\/p\u003e\n\u003c\/section\u003e\n\u003c!-- FINAL CTA --\u003e\n\u003csection class=\"sm-section sm-final\"\u003e\n\u003ch2\u003eA1での繰り返しプリントに合った構成を選ぶ\u003c\/h2\u003e\n\u003cp\u003eプレートをすでにお持ちならDIY組み立てキットを。PEIプレート3枚も必要なら、DIYキットとのセットをお選びください。\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDIY：57.99米ドル・DIY＋PEIプレート3枚：105.99米ドル\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eパーツはご自身でプリントしてください。\u003c\/strong\u003e ページ上部の商品オプションから、ご希望の構成をお選びください。\u003c\/p\u003e\n\u003c\/section\u003e\n\u003c!-- ORIGINAL PRODUCT IMAGE --\u003e\n\u003cp\u003e\u003cimg loading=\"lazy\" alt=\"繰り返しプリント用に準備したBambu Lab A1に取り付けたINNOCUBE SwapMod自動ビルドプレート交換システム\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0777\/6059\/4113\/files\/20250428154548.png?v=1745826381\"\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"INNOCUBE 3D","offers":[{"title":"3MF Print Files + Assembly Pack (Screws + Tools)","offer_id":49256265777345,"sku":"SWAPMOD-A1-3MF-ACC","price":57.99,"currency_code":"USD","in_stock":true},{"title":"3MF Files+Assembly Pack+3 PCS PEI","offer_id":49256265744577,"sku":"SWAPMOD-A1-DIY-PEI3","price":105.99,"currency_code":"USD","in_stock":true},{"title":"A1 Swapmod Kit+5 PCS PEI","offer_id":49469296804033,"sku":"SWAPMOD-A1-PEI5","price":169.99,"currency_code":"USD","in_stock":true},{"title":"Assembly Pack (Screws + Tools)","offer_id":49256265810113,"sku":"SWAPMOD-A1-ACC","price":27.99,"currency_code":"USD","in_stock":true},{"title":"PEI×5","offer_id":49258418405569,"sku":"SWAPMOD-PEI5","price":69.99,"currency_code":"USD","in_stock":true},{"title":"Ultimate Bundle (Standard Kit + PEI×5 + Metal Pack)","offer_id":49530449789121,"sku":"SWAPMOD-A1-PEI5-HOOK","price":239.0,"currency_code":"USD","in_stock":true},{"title":"Farm Assembly Pack (Buy 4 Get 1 Free Screws + Tools)","offer_id":50126653358273,"sku":null,"price":109.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0777\/6059\/4113\/files\/A1_SwapMod_DIY_kit_3MF_file.png?v=1791613480"},{"product_id":"k1c-extuder-board","title":"Original K1C PCBA_G_K1-MAX K1_T9_GD32F303CBT6 NOZZLE-C-V13 HQPCB-2 Adapter Board PCBA Breakout Module Replacement Compatible with Creality K1C K1 K1 MAX 3D Printer Accessories","description":"\u003cul class=\"a-unordered-list a-vertical a-spacing-mini\"\u003e\n\u003cli class=\"a-spacing-mini\"\u003e\u003cspan class=\"a-list-item\"\u003eThis is original PCBA Breakout Module Replacement for K1, K1 Max and K1C hotend\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"a-spacing-mini\"\u003e\u003cspan class=\"a-list-item\"\u003eCompatible with Creality K1, K1 MAX and K1C 3D Printer\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"a-spacing-mini\"\u003e\u003cspan class=\"a-list-item\"\u003eModel: K1_T9_GD32F303CBT6\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"a-spacing-mini\"\u003e\u003cspan class=\"a-list-item\"\u003ePackage: 1piece adapter board\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Innocube3d","offers":[{"title":"Default Title","offer_id":49237147812033,"sku":"","price":36.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0777\/6059\/4113\/files\/original-k1c-pcba-g-k1-max-k1-t9-gd32f303cbt6-nozzle-c-v13-hqpcb-2-adapter-board-pcba-breakout-module-replacement-compatible-with-creality-k1c-k1-k1-max-3d-prin-993682.jpg?v=1748330778"},{"product_id":"filament-storage-bags-light-proof-vacuum-storage-kit","title":"30pcs Filament Storage Bags - Light-Proof Vacuum Sealed Kit with USB Pump 3D Printer Filament Dry Storage 32x34cm","description":"\u003ch2\u003e30pcs Premium Filament Vacuum Storage Bags - Keep Your Filament Dry\u003c\/h2\u003e\n\u003cp\u003eProtect your valuable 3D printer filament from moisture, dust, and degradation with this complete \u003cstrong\u003evacuum storage system\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch3\u003e🛡️ Complete Protection System:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e30 Large Storage Bags:\u003c\/strong\u003e 32x34cm size fits most filament spools\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB-Powered Vacuum Pump:\u003c\/strong\u003e Quick and easy air removal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLight-Proof Design:\u003c\/strong\u003e Protects UV-sensitive filaments\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMoisture Barrier:\u003c\/strong\u003e Keeps filament dry and ready to print\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReusable:\u003c\/strong\u003e Durable bags for long-term storage\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e💡 Why Proper Filament Storage Matters:\u003c\/h3\u003e\n\u003cp\u003eMoisture is the enemy of quality 3D prints. Wet filament causes stringing, poor layer adhesion, and failed prints. These vacuum storage bags ensure your PLA, ABS, PETG, Nylon, and TPU filaments stay in perfect condition.\u003c\/p\u003e\n\u003ch3\u003e📦 What's Included:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e30x Vacuum storage bags (32x34cm)\u003c\/li\u003e\n\u003cli\u003e1x USB vacuum pump\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eInvest in filament protection and save money on wasted prints!\u003c\/strong\u003e\u003c\/p\u003e","brand":"Innocube3d","offers":[{"title":"Default Title","offer_id":49396855767233,"sku":null,"price":45.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0777\/6059\/4113\/files\/91uG7qWSUzL._SL1500.jpg?v=1752034900"},{"product_id":"silicone-brush-nozzles-wiper","title":"Silicone Brush Nozzle Wiper for Bambu Lab X1 P1 Series - 3D Printer Cleaning Tool","description":"\u003ch2\u003eEssential Maintenance Tool for Bambu Lab Printers\u003c\/h2\u003e\n\u003cp\u003eKeep your Bambu Lab X1 or P1 series printer nozzle clean with this premium silicone brush wiper. Regular nozzle cleaning prevents print defects and ensures consistent print quality.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Temperature Silicone\u003c\/strong\u003e - Heat-resistant material withstands nozzle operating temperatures\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEffective Cleaning\u003c\/strong\u003e - Soft bristles remove filament residue without damaging the nozzle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUniversal Fit\u003c\/strong\u003e - Compatible with all Bambu Lab X1 and P1 series models\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDurable Construction\u003c\/strong\u003e - Long-lasting material resists wear and degradation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy Replacement\u003c\/strong\u003e - Simple installation when replacement is needed\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBambu Lab X1\u003c\/li\u003e\n\u003cli\u003eBambu Lab X1 Carbon\u003c\/li\u003e\n\u003cli\u003eBambu Lab P1P\u003c\/li\u003e\n\u003cli\u003eBambu Lab P1S\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy Regular Nozzle Cleaning Matters\u003c\/h3\u003e\n\u003cp\u003eFilament residue buildup on the nozzle can cause print defects including stringing, poor layer adhesion, and inconsistent extrusion. Regular cleaning with this silicone brush ensures optimal print quality and extends nozzle life.\u003c\/p\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e High-temperature silicone\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature Resistance:\u003c\/strong\u003e Up to 300°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Bambu Lab X1 and P1 series\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.2kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eMaintenance Recommendation\u003c\/h3\u003e\n\u003cp\u003eClean the nozzle before each print or whenever you notice filament buildup. Replace the brush when bristles show significant wear.\u003c\/p\u003e","brand":"Innocube3d","offers":[{"title":"1PCS","offer_id":49573125456065,"sku":null,"price":9.99,"currency_code":"USD","in_stock":true},{"title":"3PCS","offer_id":49573125488833,"sku":null,"price":17.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0777\/6059\/4113\/files\/20251003094542_186_5.jpg?v=1759455981"},{"product_id":"hardened-scraper-blades-compatible-with-bambu-lab-a1-x1-p1-series","title":"Hardened Scraper Blades for Bambu Lab A1 X1 P1 Series Durable Steel Replacement Blades","description":"\u003ch2\u003ePremium Hardened Steel Scraper Blades for Bambu Lab Printers\u003c\/h2\u003e\n\u003cp\u003eKeep your prints coming off clean and easy with these \u003cstrong\u003ehardened steel scraper blades\u003c\/strong\u003e designed specifically for Bambu Lab A1, X1, and P1 series 3D printers.\u003c\/p\u003e\n\u003ch3\u003e✨ Key Features:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUltra-Durable Hardened Steel:\u003c\/strong\u003e Long-lasting sharpness that won't bend or break\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePerfect Fit:\u003c\/strong\u003e Designed specifically for Bambu Lab printer beds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy Print Removal:\u003c\/strong\u003e Slide under prints effortlessly without damaging your build plate\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEssential Maintenance Tool:\u003c\/strong\u003e Every 3D printer owner needs quality scrapers\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eValue Pack:\u003c\/strong\u003e Multiple blades included for extended use\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e💡 Why You Need This:\u003c\/h3\u003e\n\u003cp\u003eStruggling to remove prints from your build plate? These professional-grade scraper blades make print removal quick, safe, and damage-free. The hardened steel construction ensures they stay sharp through hundreds of uses.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatible with:\u003c\/strong\u003e Bambu Lab A1, A1 Mini, X1, X1C, X1E, P1P, P1S\u003c\/p\u003e","brand":"Innocube3d","offers":[{"title":"Default Title","offer_id":49573488623809,"sku":null,"price":8.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0777\/6059\/4113\/files\/20251003174548_194_5.jpg?v=1763883936"},{"product_id":"hardened-steel-dual-gear-extruder-bambu-p1p-p1s","title":"Hardened Steel Dual Gear Extruder Upgrade Kit for Bambu Lab P1P \/ P1S","description":"\u003ch2\u003eUpgrade Your Bambu Lab P1P \/ P1S Extruder — Stop Filament Slipping, Start Printing Reliably\u003c\/h2\u003e\u003cp\u003eThe stock Bambu Lab extruder works fine for casual printing. But if you're running long sessions, abrasive filaments, or a high-volume workflow — slipping, grinding, and inconsistent extrusion will slow you down.\u003c\/p\u003e\u003cp\u003eThis \u003cstrong\u003eHardened Steel Dual Gear Extruder Kit\u003c\/strong\u003e replaces your stock unit with a precision dual-gear system built for serious 3D printing. Stronger grip, smoother feeding, and built-in filament runout detection — everything your P1P or P1S needs to keep up with demanding print jobs.\u003c\/p\u003e\u003ch3\u003eWhy Upgrade?\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual Gear Extrusion:\u003c\/strong\u003e Grips filament from both sides for consistent, slip-free feeding — even with flexible or abrasive materials\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardened Steel Gears:\u003c\/strong\u003e Wear-resistant construction handles PLA, PETG, TPU, ABS, and carbon fiber blends without degrading\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt-in Filament Runout Detection:\u003c\/strong\u003e Smart sensor stops your print before a failed spool ruins hours of work\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrop-in Replacement:\u003c\/strong\u003e Designed specifically for Bambu Lab P1P and P1S — no modifications required\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWide Filament Compatibility:\u003c\/strong\u003e Works with all standard 1.75mm filaments\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDual gear extruder assembly (fully assembled)\u003c\/li\u003e\n\u003cli\u003eMounting hardware\u003c\/li\u003e\n\u003cli\u003eInstallation tools\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCompatible With\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBambu Lab P1P\u003c\/li\u003e\n\u003cli\u003eBambu Lab P1S\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eRunning a Bambu Lab A1?\u003c\/strong\u003e Check out our \u003ca href=\"https:\/\/www.innocube3d.com\/products\/swapmod-bambu-a1-auto-3d-printing\"\u003eSwapmod Auto Plate Changer\u003c\/a\u003e — the automation upgrade built specifically for the A1.\u003c\/p\u003e","brand":"INNOCUBE3D","offers":[{"title":"Default Title","offer_id":50547498320065,"sku":null,"price":44.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0777\/6059\/4113\/files\/P1_extruder.jpg?v=1788181428"},{"product_id":"bambu-lab-a1-a1-mini-ams-lite-filament-hub-4-way","title":"Bambu Lab A1 \/ A1 Mini AMS Lite Filament Hub (5-Way) — Multi-Color Printing Upgrade","description":"\u003ch2\u003eRun 4 Filaments Simultaneously on Your Bambu Lab A1 or A1 Mini\u003c\/h2\u003e\n\u003cp\u003eThe AMS Lite is a game-changer for multi-color printing — but only when your filament routing is reliable. A loose connection, a tangled tube, or a misaligned feed path means failed prints and wasted filament.\u003c\/p\u003e\n\u003cp\u003eThis \u003cstrong\u003e5-Way AMS Lite Filament Hub\u003c\/strong\u003e gives your Bambu Lab A1 or A1 Mini a clean, organized filament routing system designed to prevent exactly those issues. Four filament paths enter, one exits to your printer — smooth, consistent, and tangle-free.\u003c\/p\u003e\n\u003ch3\u003eWhy Your AMS Lite Setup Needs This\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e5-Way Switching:\u003c\/strong\u003e Cleanly routes all 4 AMS Lite filament channels through a single organized hub\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSecure Connections:\u003c\/strong\u003e Snug-fit ports keep PTFE tubes locked in place during active color switches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReduces Tangles \u0026amp; Jams:\u003c\/strong\u003e Controlled routing means fewer multi-color print failures\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrop-In Installation:\u003c\/strong\u003e No tools, no modifications — fits A1 and A1 Mini out of the box\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes 2 Adapter Rings:\u003c\/strong\u003e For secure integration with your existing AMS Lite tube setup\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1× 5-Way AMS Lite Filament Hub\u003c\/li\u003e\n\u003cli\u003e2× Adapter rings\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatible With\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBambu Lab A1\u003c\/li\u003e\n\u003cli\u003eBambu Lab A1 Mini\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRunning automated multi-spool printing?\u003c\/strong\u003e Pair this with our \u003ca href=\"https:\/\/www.innocube3d.com\/products\/swapmod-bambu-a1-auto-3d-printing\"\u003eSwapmod Auto Plate Changer\u003c\/a\u003e for a fully hands-free Bambu Lab A1 farm setup.\u003c\/p\u003e","brand":"INNOCUBE3D","offers":[{"title":"Default Title","offer_id":50548452819137,"sku":null,"price":13.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0777\/6059\/4113\/files\/A1_hub.jpg?v=1788229564"},{"product_id":"innocube-automatic-filament-feeder","title":"Innocube Automatic Filament Feeder (AFF) for Bambu Lab P2\/P1\/A1","description":"\u003ch2\u003e\u003cstrong\u003e\u003cspan class=\"\"\u003eInnocube Automatic Filament Feeder (AFF) for Bambu Lab P2, P1, \u0026amp; A1 Series\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eReduce interruptions caused by empty filament spools. The Innocube Automatic Filament Feeder ensures a seamless, uninterrupted 3D printing experience by automatically feeding new filament when your current spool runs out.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFully Automatic Splicing:\u003c\/strong\u003e Detects filament depletion and instantly feeds the backup spool.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecision Engineering:\u003c\/strong\u003e Features a robust metallic-textured body with smooth, designed for smooth filament feeding.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlug \u0026amp; Play Integration:\u003c\/strong\u003e Designed to work flawlessly with your existing print farm setup.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTransparent Monitoring:\u003c\/strong\u003e Clear lower housing allows you to visually inspect the filament path and gear engagement.\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePerfect for long 72-hour prints, large models, or running a 24\/7 print farm without manual intervention.\u003c\/p\u003e\n\u003cp class=\"ds-markdown-paragraph\"\u003e\u003cstrong\u003e\u003cspan class=\"\"\u003eQ: Can I use this with my Bambu AMS or AMS Lite?\u003c\/span\u003e\u003c\/strong\u003e\u003cspan class=\"\"\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan class=\"\"\u003eA: No. The Innocube AFF is designed as a\u003cspan\u003e \u003c\/span\u003e\u003c\/span\u003e\u003cstrong\u003e\u003cspan class=\"\"\u003estandalone external feeder\u003c\/span\u003e\u003c\/strong\u003e\u003cspan class=\"\"\u003e\u003cspan\u003e \u003c\/span\u003eand\u003cspan\u003e \u003c\/span\u003e\u003c\/span\u003e\u003cstrong\u003e\u003cspan class=\"\"\u003edoes not\u003c\/span\u003e\u003c\/strong\u003e\u003cspan class=\"\"\u003e\u003cspan\u003e \u003c\/span\u003ework with AMS or AMS Lite. It is the perfect solution for users who do not have an AMS or want a more simplified, multi-spool setup on external stands.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"ds-markdown-paragraph\"\u003e\u003cstrong\u003e\u003cspan class=\"\"\u003eQ: Will it void my Bambu Lab warranty?\u003c\/span\u003e\u003c\/strong\u003e\u003cspan class=\"\"\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan class=\"\"\u003eA: No. The AFF is entirely external, requires no hardware modifications, no screen interactions, and no firmware changes. It is 100% safe and reversible.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"ds-markdown-paragraph\"\u003e\u003cstrong\u003e\u003cspan class=\"\"\u003eQ: Is the 3D printed housing durable?\u003c\/span\u003e\u003c\/strong\u003e\u003cspan class=\"\"\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan class=\"\"\u003eA: Yes. Despite being 3D printed, we use\u003cspan\u003e \u003c\/span\u003e\u003c\/span\u003e\u003cstrong\u003e\u003cspan class=\"\"\u003ehigh-temperature engineering-grade plastics\u003c\/span\u003e\u003c\/strong\u003e\u003cspan class=\"\"\u003e\u003cspan\u003e \u003c\/span\u003eand an infill pattern specifically designed to withstand continuous mechanical stress for thousands of hours, printed in engineering-grade material selected for repeated mechanical use.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"ds-markdown-paragraph\"\u003e\u003cstrong\u003e\u003cspan class=\"\"\u003eQ: How does it feed the filament if it doesn't use AMS?\u003c\/span\u003e\u003c\/strong\u003e\u003cspan class=\"\"\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan class=\"\"\u003eA: Simply place the AFF next to your printer or dry box. The backup spool sits on the external stand, and the included PTFE tube guides the filament directly into the printer's toolhead, automatically managing the splice seamlessly.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Innocube3d","offers":[{"title":"Default Title","offer_id":50563211919553,"sku":null,"price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0777\/6059\/4113\/files\/image_c86f1c2a-f9e8-41c0-8270-fb8c161781c3.png?v=1788579099"}],"url":"https:\/\/www.innocube3d.com\/ja\/collections\/spare-parts.oembed?page=2","provider":"Innocube3d","version":"1.0","type":"link"}